Question about Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer

1 Answer

Maytag neptune washer

I cant wash a load of clothes without the washer shutting off several times during the wash cycle. it is to the point now that i have to press and hold the start button during the wash. This is a problem that has been fixed by repair people in the past and was a relatively cheap fix...about $100.00. Can i fix it myself???

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Doesn't your unit have a lock light in addition to an on light? On mine when you start the machine a red light comes on, then after a minute or two the lock light above it comes on. Once the lock light lights, the machine shouldn't stop. If only the initial light comes on, the door isn't locking. As a result, as the drum moves the clothes and they push against the unlocked door, it turns the machine off. You might need to check/tighten the door latch. Also check the door wax motor/door lock assembly.

Posted on Jan 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My maytag neptune front load washer keeps shutting off during the wash cycles. Any idea as to what is wrong and how to fix?


my matag neptune front load washer keeps shutting off durning the wash cycles,and the letters LP keep appearing.Any idea as to what is wrong and how to fix it?

May 01, 2010 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Maytag neptune washer clothes staying wet after cycle


Is your door lock light on when machine is in use? I am having the same issue as you and I believe it is because my door is not locking during use.

Apr 17, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Noise hear during washing cycle?


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Mar 28, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Spin cycle


it sounds like there is either an obstruction in the pump, or the load is getting off balance during the spin cycle. two things to try, fill the washer with no cloths in it, when it starts to agitate, stop the cycle and put it in drain/spin cycle. the water should be out in under a minute. its hard to see because the door locks, but you can hear a difference in the pump when its out, or after 60 seconds, press cancel and open the lid to check. if the waters out in that time, the pumps ok. then run it through the spin diagnostic with a load of cloths. make sure the cloths are wet, and a normal load you wash. this will check to see if the load is getting off balance, and shutting down during the spin cycle. let me know if you still have the problem. good luck, shane

Aug 23, 2009 | Maytag Neptune Washer

1 Answer

Maytag neptune frot load will not reach full spin speed.


It will not spin while washing, it's more of a rocking back and forth. As far as the spin cycle. If it's not reaching full speed I bet you'll notice that it's not doing the full cycle because the load is bouncing around and cause the washer to shut off. take some of the clothes out and watch it spin the water out.

Mar 26, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Loud noise


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary

Hope it may help you;

Regards;
VOTIT

Jan 29, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Excessive wobble


If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary.

Sep 06, 2008 | Maytag Neptune Washer

2 Answers

Maytag Neptune Frontload Washer (MAH5500B)


you def have a direct short somewhere, try remiveg the 3 screwsfrom the top of hte console and tipping foward you ll see a cintrol boardand some wiring look for the "arcing" mark or wire off causing short.

Mar 17, 2008 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...