Question about Sanyo (6103055602) Projector Lamp for PLC-XT10A, PLC-XT11, PLC-XT15

1 Answer

Sanyo plc-xt10a will not power up. ready light is not on. power to unit is good.

Posted by on

  • amick827 Sep 11, 2009

    We replaced the lamp and the unit worked fine. They're telling me that there was a storm that knocked out the power to our building and the projector is the only thing that didn't come back on. I had a feeling there was a fuse, but I'll still check this other things to be on the safe side. Thanks for your help!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 149 Answers

First, check the lamp/lamp door--the door has a safety interlock that prevents power from getting to the projector. Make sure the power *is* getting to the unit by using a known-good power cord. Also, check the 3 air filters. If one or more was clogged with dust, the unit might have had a thermal sensor trip. There is also an internal fuse on the power supply which may have blown.When was the last time the projector worked correctly? Have there ever been any power problems related to that unit before? If the above checks yield no success, the projector will have to be repaired at a service facility. Hope I was of some help---Rick

Posted on Sep 10, 2009

Testimonial: "Ricks information was very helpful. A $2.99 fuse saved us a lot on repair bills! Thanks, Rick!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo PLC-XT10A shuts off after 30 seconds


That is really odd maybe when its upside down something is barely coming loose or a fan is getting blocked?

Dec 08, 2012 | Sanyo PLC-XT10A

1 Answer

My Sanyo plc su20n comes on but shutts off after a couple of minutes. Does not give a temp warning just ready indicator goes of and picture goes off. IF you wait a couple of minutes the ready light will...


check the physical nature of the lamp in the projector. around the filament of the lamp, you might notice dark corrosion building around it. this what normally cause premature shut off.

Sep 14, 2011 | Sanyo PLC SU20N Multimedia Projector

1 Answer

I have a model PLC-XT11 and when I turn the power on the temp light and green ready light begin to flash. The red lamp light is on steady. I replace the lamp but no luck.


one or more of the fans may not be working right. also, the temp sensor may be shot. if the last time you used it it wasn't shut down properly, it may still be in cool-down mode.

Nov 06, 2009 | Sanyo PLC-XT11 Multimedia Projector

1 Answer

Hello, I have a PLC XP45L. As soon as I turn on the projector it goes off. The only light on top of the projector is the READY light. We replaced the lamp last year and probably have around 50 hours on...


good day mr david, just clean the air filter of your projector, check all the fans if working... if this problem occur again your lamp ballast is defective.
jahting

Oct 29, 2009 | Sanyo PLC XP45L Multimedia Projector

1 Answer

Projector will not power up, confirmed 120vac to unit is good


this particular model will not come on if the bulb is burnt out. check the bulb. most common problem.
David

May 25, 2009 | Sanyo PLC-XP57 LCD Projector

3 Answers

Sanyo PLC-XU33 image displayed for 10 seconds then turns off


Owner decided to upgrade to a newer projector. Lamp was too expensive.

May 07, 2009 | Sanyo PLC XU33 Multimedia Projector

1 Answer

Sanyo PLC-XU47 seems to power cycle


Welcome to resolve the problem if you please say what are the solution to me the same problem

Jun 07, 2008 | Sanyo PLC XU35 Multimedia Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73680 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...