Go to menu and click each choice until you see a choice of language. English should be obvious ( I think). If that doesn't work, look in your manual for a way to restore it to factory settings. You might even just remove the batteries for about 15 minutes or so. When I replace my batteries I always have to reset my settings such as date. I hope this works
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press the MENU button. Use cursor-right/left to select the Settings tab (the one that doesn't look like a camera). Use cursor-up/down to select the tenth item on the menu and press the OK button. Select your language and press OK.
hi... The transmission system that moves the lens in and out has a
problem with it's gears. There is most likely a gear or an actuator
that has fallen out of alignment and is getting stuck at a certain
point as the lens comes in/out.There is some disturbacnce of the lens
arrangement that is preventing the lens from coming in/out.Any of these
symptoms above could trigger the camera to shut itself off to protect
itself from further damage.
This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html