Question about Epson Aculaser C1100 Printer

1 Answer

No print on the RHS of page using Epson Aculaser C1100

No print appears on the right hand 2.5 cm of any page. It fades out over about 2mm.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 163 Answers

Two things to check,
1- clean the laser by opening the front cover, pull forward the green lever on the R/H side, take off the little panel on the R/H side of the printer and pull out/push in the lens cleaning "stick". Replace panel and push the lever back in, close the front and try a test print.
If that didn't work:
2- Open the lid, lift the orange lever and remove the photoconductor. Be careful with it as it is easily scratched. Inside the printer rotate the toner cartridges and check that the cartridge lock levers are fully locked as even a couple of millimeters can block the laser.

Hope this helps.

Posted on Sep 09, 2009

Testimonial: "Solved my problem immediately - very many thanks for the expert advice."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson PX650 not printing the full A4 page of my receipts, cutting off on right hand side


COULD BE THAT THE PAPER IS BIGGER SIZE THEREFORE CUTTING.NEED TO SAY FIT TO PAGE ON YOUR PRINTER DRIVER

Nov 18, 2013 | Epson Aculaser C1100 Printer

3 Answers

Print fade on both left and right hand side


Have you tryed to clean the printer head?

Mar 25, 2008 | Epson Aculaser C1100 Printer

2 Answers

Right hand side page print quality very poor, almost unreadable


this is cause of the lens is dirty with toner droping..
open the front cover and on the right side, there is a level for you to pull out.. at the right side of the printer, open the small cover and you will be able to find a cleaner. To clean..pull out the holder few times.. by applying slight pressure..that will clean the bottom lens..and u should be able to print out fine now..

Feb 26, 2010 | Epson Aculaser C1100 Printer

1 Answer

Epson C1100 - we get smudged copies and also not printing on far rhs of copy. Any ideas?


Drum needs cleaning. Also generic toner might not work so good as original.

Feb 12, 2010 | Epson Aculaser C1100 Printer

2 Answers

Epson aculaser c1100 not printing right hand edge


The problem may well be that the drum needs cleaning. There is a plastic flap on the rhs of the machine. Open that and you can pull a long lever out. You also need to let down the front cover and pull out the lever on the right hand edge that faces you. Then extend the long lever at the side as far as it can go and push it in and out a few times. This should solve the problem. Put the front lever back and close the cover. It took me ages to find this - Epson are not good at highlighting it,.

Oct 22, 2009 | Epson Aculaser C1100 Printer

1 Answer

White vertical line in image printing


how can we take all fax sent and received print from hp 3050 printer.

Apr 01, 2009 | Epson Aculaser C1100 Printer

1 Answer

Printing problem with epson c1100


sounds like a transfer belt problem - new photoconductor unit may be needed

Nov 21, 2008 | Epson Aculaser C1100 Printer

2 Answers

Epson C1100 Aculaser Duplex unit not recognised by Vista


I have had the problem, but it is easily fixed in Vista.
1. Click Control Panel
2 Click Printers
3 Right click your AL-C1100
4 Click Properties
5 Click Optional Settings label
6 Click - "Update printer info manually"
7 Click - "Duplex Print Unit "
8 Click Settings
9 Tick box in bottom left hand corner - "Duplex Print Unit"
10 Click OK .... exit

Sep 12, 2008 | Epson Aculaser C1100 Printer

1 Answer

Epson c1100 faded print


Review online guide and trouble shooting for suggestions.

The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.

Click this Link

Under Select a Product Range
Choose Laser Printers4.gif on the webpage1.gif
Under Select a Product
Choose Aculaser C1100 on the webpage
Under Select an OS
Choose the operating system1.gif on the machine where you will install the printer on the webpage
Click Confirm Selection

The manuals and documentation link will allow you to download manuals that were on your CD ROM

you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD

Click the back button on the browser

click the Drivers and Software Link

This allows you to download software files that were probably on your installation CD

Click the back button on the browser again

Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.

I hope this helps

Dec 12, 2007 | Epson Aculaser C1100 Printer

1 Answer

Print quality Epson C1100


It sounds as though a cartridge is faulty. To determine which one, the easiest way is to run a page of text/block of colour through in yellow then cyan then magenta. which ever page comes out with the streaks on it will tell you which cartyridge to ditch and replace. Hope this helps Cops Pete@wedotoners.com

Oct 10, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...