Question about Televison & Video

1 Answer

Problems with one for all 8305

Do you know how to sort out problems with this remote control? The thing keeps on deciding which buttons work and I have changed the batteries

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 21, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remote Control

See if there is some sort of reset button that will restore your unit to the condition it came as new. If you cannot locate, give Panasonic a call and they will advise.

U can also unplug from wall to see if it erases prior settings and resets.

Nov 18, 2015 | Panasonic Televison & Video

1 Answer

Any suggestions why my pro24z remote has frozen it is fully charged

sure your remote has frozen? you can check if it is still working, by pointing it to a digital camera (camera in a phone is fine) Then press one or a few buttons on the remote and look on the mnitor screen of the camera if you see a light flickering.
If you see a light, the remote is still working.
If some buttons don't work anymore, check if somebody poured in some soda or coffee.If so, you could try cleaning it. but the best thing to do is buy a new remote. Read how manny questions are here about "universal" remote controllers and all their problems and you might decide to buy the original.

Don't forget to replace batteries so now and then.

Jul 12, 2014 | Televison & Video

2 Answers

My television will not respond to remote or button inputs following start-up. Is there a hard reset procedure that may allow me to possibly resolve this issue?

Hello pal! I dont really know if there is a hard reset function, but the very same thing happened to me, i think its because of humidity or maybe the very grease of human hands...

the thing is that at first i thought i could manage it trying silly things like keep pressing the tvs buttons while powering on the tv with the remote; it seemed to work, but one day it became impossible.

I was using the tv as a pc monitor, so i didnt care much for a while because it was set on the hdmi input, but one day i changed it and i could never got it back... and after asking at official services and they expensives charges (plus moving such a big and heavy tv) i decided to "solve" the problem by myself and found a manual telling the tech equipment of the tv...

and opened it by myself and carefully deattached the piece that controls the front panel, and it worked!! of course, i rely only on the remote control to use the tv, but its better than nothing.... here you can see it, its on the lower left corner of the tv, as i show on the pic. ask me again if you need the manual of this tv..

be sure not to damage the piece and cables... just in case your future self decides to take the tv to repair service :)

4d708800-e644-4614-b6df-ad96593081e2.jpg 04e7807e-b060-472d-bada-4558b4aded08.jpg

Jun 19, 2014 | LG 42LE5500 42 in. TV

1 Answer

CAN KAMELEON URC 8305 Remote Control Airconditioners

you must read carefully the instr.manual from your remote control. download from or

God bless you

Jul 09, 2012 | Televison & Video

1 Answer

I don't know how to connect the madcatz wireless controller to my xbox 360 please send me a step by step guide

first of all i think madcatz is a horrible type of remote but, new batteries and put them in, step2. try to connect if not working move on: step3.try to connect but this time don't sit too far away (no more than 2m)if still not working, the button near the battery pack on your gaming console and remote control if still not working well then make sure to keep you xbox360 AWAY FROM A CHANNELER (a sort of amplifier thing) because i had mine upstairs, no channeller just the xbox and tv, worked perfect! but when its downstairs near the channeller IT WILL NOT CONNECT AT ALL! best of luck ~XXMAULGFXX

Feb 11, 2011 | Video Game Consoles & Games

1 Answer

Samsung Remote BN59-00539A not working

Remote Control not working with dvd plyer

Mar 25, 2009 | Samsung BN59-00599A Remote Control

12 Answers

In need of codes for philips universal remote CL034

The codes to Sony TV's Are:
Good Luck
This is for model number 3L034

Sep 09, 2007 | Philips Magnavox Learning Universal Remote

7 Answers

Remote control not working

I had the problem where when i would try to use my remote, it would say "check remote2". I've got a DMR-E55. I called panasonic and they told me to hold down the "enter" and "2" button for about 10 seconds. then it worked. hope it works for you too.

Jul 09, 2007 | Panasonic DMR-ES10 DVD Recorder

2 Answers

After programming my new universal remote, the tv keeps changing chanels! wont stop!

you need to program your remote control. take the battaries out. and maually turn the tv on. then hit the source you want to view. for example, I want to control the tv set. I push, code search and hold it then push the source button and then release the source button and then release the code search button. now, aim at the tv and then keep pressing power button till it goes off. when the tv is off, hit return or set or something like that.( every remote has different calling for it but still the same function) it should work. try it and let me know.

Mar 06, 2007 | GE HO976855-Device Universal Remote with...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5304 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides