Question about Tomtom GO 510 GPS Receiver

1 Answer

Home address is wrong and we cant seem to correct it. and, safety lock is enabled and we cant get get where we need to be without holding the button down for 15 seconds and restarting it over again. we need help please..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,153 Answers

I would suggest a HARD reset first.

You will have to tell it some of your preferences once again but it should get you going.

If you have an SD card in try removing that before you power up.

You may also want to try the hard reset.
Paper clip in the tiny hole by the card slot.
Push it in firmly whilst the unit is powered up (not too hard) for about 3 seconds then release

You may have to power down and then up again and even hold down the power button a little longer the

If you can get to it using the RIGHT arrow there is also a reset to factory default option on the tomtom itself.

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Control lock light is on and dishwasher doesn't start


There is a Control Lock which locks all the control buttons, so the dishwasher cannot be started. It is enabled by pressing and holding the lock button for about 3 seconds. To disable, press and hold the lock button until the light goes out. A single beep will be heard when the feature is turned on.

There is also a Keylock feature which locks the drawer shut and disables all the controls so the dishwasher cannot be opened or started. It is enabled by pressing and holding the lock button for about 5 seconds. To disable, press and hold the lock button until the lock light goes out. Two beeps will be heard when the feature is turned on.

Both these functions are safety features that enable the consumer to lock the dishwasher controls to prevent children from inadvertently starting the appliance.

These instructions are on page 12 of your owner's manual. If you no longer have a manual, you can obtain a FREE copy at managemylife.com. Just go to the site and type in your number under the "Manuals" link. These manuals are available in .pdf (Adobe) format that you can download or print for FREE.
(posted by Jeff Rockwell)

http://www.whirlpool.com/owners-center/owners-center-homepage.content.html

Mar 11, 2013 | Dishwashers

2 Answers

My screen is locked and i cant remember my gmail acount or password


If you know what email address you used as the recovery address you can enter it here and Google will email you your account information.

Mar 08, 2011 | Cell Phones

1 Answer

Our Kenmore Elite He4 dryer seems to be locked. How can I unlock it?


If you are referring to the Control Lock on a Whirlpool Duet, Kenmore Elite, or Maytag Epic series front loader, this is actually a safety feature that enables the consumer to lock the control panel to prevent children from manipulating the controls and accidentally starting the appliance.

With the lock on, the control panel is disabled and you cannot use any of the controls, except the button to unlock it. It can inadvertently be set following a power outage, leaning against the control panel, or pressing and holding the wrong button. This is usually not an indication of a malfunction.

If this is a Whirlpool manufactured appliance (such as Kenmore Elite, Maytag Epic or Whirlpool Duet), the following link explains how to lock/unlock this feature:

http://www.fixya.com/support/r3608801-control_panel_lock


These instructions are also printed on the front panel of the appliance and in the owner's manual.

If this does not correct your problem, then you may have a more significant problem other than a simple operator control button issue (such as an operator console problem or main control board issue). Please post back and let me know if you need further assistance.

Aug 23, 2010 | Kenmore Dryers

1 Answer

Control locked light is on and cant get the washer to do anything


The Control Lock is a safety feature that enables the consumer to lock the control panel to prevent children from manipulating the controls and accidentally starting the appliance.


With the lock turned on, the control panel is disabled and you cannot use any of the controls, except the button to unlock it. It can inadvertently be set following a power outage, leaning against the control panel, or pressing and holding the wrong button. This is usually not an indication of a malfunction.

If this is a Whirlpool manufactured appliance (such as Kenmore Elite, Maytag Epic or Whirlpool Duet), the following link explains how to lock/unlock this feature:

http://www.fixya.com/support/r3608801-control_panel_lock


These instructions are also printed on the front panel of the appliance and in the owner's manual.

If this does not correct your problem, then you may have a more serious problem other than a simple operator control button issue (such as an operator console problem or main control board issue). Please post back and let me know if you need further assistance.

Jul 19, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Unlock the controls to start dishwasher


If the model number you listed this question under is correct, this model dishwasher has two locking features (both controlled by the same button).

There is a Control Lock which locks all the control buttons, so the dishwasher cannot be started. It is enabled by pressing and holding the lock button for about 3 seconds. To disable, press and hold the lock button until the light goes out. A single beep will be heard when the feature is turned on.

There is also a Keylock feature which locks the drawer shut and disables all the controls so the dishwasher cannot be opened or started. It is enabled by pressing and holding the lock button for about 5 seconds. To disable, press and hold the lock button until the lock light goes out. Two beeps will be heard when the feature is turned on.

Both these functions are safety features that enable the consumer to lock the dishwasher controls to prevent children from inadvertently starting the appliance.

These instructions are on page 12 of your owner's manual. If you no longer have a manual, you can obtain a FREE copy at managemylife.com. Just go to the site and type in your number under the "Manuals" link. These manuals are available in .pdf (Adobe) format that you can download or print for FREE.

If you have any questions, please post back and let me know. I hope this helps you.

Jun 27, 2010 | KitchenAid 23 in. KUDD01DPPA Stainless...

2 Answers

How to undo controls locked?


Hi,
To turn off the control lock feature try holding the "end of cycle" button down for 5 or 6 seconds.This must release the lock.

Thank you !!

May 25, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Controls locked on washer and cant unlock them


The Control Lock is a designed safety feature that enables the us to lock the control panel to prevent small children from manipulating the controls and accidentally starting the appliance.

The controls can be easily locked or unlocked by pressing and holding the following button on the front panel:

Whirlpool Duet Washer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Whirlpool Duet Dryer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 3 seconds.

Kenmore Elite Dryer - Press and hold the AUTO DRY LEVEL button for 3 seconds.

Please do refer this link for a detailed explanation for your knowledge.
http://www.fixya.com/support/t4186517-control_lock_light_machine

Mar 15, 2010 | Maytag Washing Machines

1 Answer

Safety lock enabled


if safety lock enabled then some options are disabled.

Simply stop moving (stop driving) and all options will come back!!!

and go to Preferences and select Heart icon and select "Disable safety lock"

Apr 05, 2009 | Tomtom One XL GPS Receiver

5 Answers

Safety lock enabled


In Tom Tom One 3rd Edition - Go to Change Preferences > Safety Preferences > Uncheck >> Hide most menu options while driving > Done. This should work!

Sep 25, 2008 | Tomtom GO 700 GPS Receiver

1 Answer

Deleting wrong home address


Tap on the screen, go to "Change Preferences",then browse to "Change Home Location" and set the correct location.

Feb 29, 2008 | Tomtom ONE GPS Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...