Nokia phones get web:gateway no reply when trying to connect to wrt600n linksys router

Hi sounylee,
here is the linksys download page for your router.

http://support.linksys.com/en-us/support/routers/WRT54G2

Just make sure you select the right Hardware Version.

Hope this helps!
Don't forget to rate

Gary

Try to upgrade firmware ....And reset your router..

no Wireless routers can only send out a signal

Login to the web-server "inside" the router, and verify that the 'WAN' side of the router has obtained an IP-address from your Internet Service Provider.

A couple of suggestions.
First, check your signal strength. The further you are away from your wireless router, the less signal strength you have. The router compensates for this by operating at a lesser bandwidth.
Next, make sure you don't have something interfering with the wireless signal. Microwaves and cordless phones are two major culprits for messing with the 2.4Ghz signal on a "G" router.
Last, check for the latest firmware from Linksys' website. Sometimes there are buggy things that just need to have a firmware upgrade to fix. Consult your product manual or the Linksys tech support site for firmware upgrade instructions.

Anywhere from 120-175$

if u want to connect ur wifi mobile with a wired internet laptop to use wifi from ur laptop and connect ur mobile to the internet absolutely free... WITHOUT ANY ROUTER.... my email id sufi24uae@yahoo.com

If you are setting up the router, the IP address, subnet, gateway and DNS should all come from your Internet provider. If you do not have any static IP address from your Internet provider, then the router should just be set on Obtain IP automatically.

If you have a Cable Internet provider, click on this link for instructions on how to configure the router.

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5010&p_created=1168404564&p_sid=BIpWncaj&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NDU2JnBfcHJvZHM9MCZwX2NhdHM9MTcyMSwxNzIzJnBfcHY9JnBfY3Y9Mi4xNzIzJnBfc2NmX2xhbmc9MSZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PWNhYmxl&p_li=&p_topview=1

If you have DSL provider, click on this link.

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5017&p_created=1168407431&p_sid=2nXTocaj&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9OTUmcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9ZHNs&p_li=&p_topview=1

What do you mean cannot get on the internet? when you are plugged into the router does this mean you cannot see any web pages? are you able to pull an IP address from the router? Check if your able to ping Gateway (router) and get a reply back. To do this go to your start command then run and type CMD and hit enter... a dos like window will come up then type the command ipconfig and hit enter again... look for the "default gateway" ex) 192.168.0.1 and then try to ping it! do this by typing ping 192.168.0.1 you should get something like this.

S:\>ping 163.254.16.1
Pinging 163.254.16.1 with 32 bytes of data:
Reply from 163.254.16.1: bytes=32 time<1ms TTL=255
Reply from 163.254.16.1: bytes=32 time<1ms TTL=255
Reply from 163.254.16.1: bytes=32 time<1ms TTL=255

if you do then that means your getting a reply back from the router and the connection between the 2 are fine. If the router is unable to obtain an ip address from your vendor.. there could be multiple reasons why. Does your provider do mac filtering? also you can try upgrading the firmware on the unit by going to linksys.com and searching for the latest firmware.. let me know how your tests go.