Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet HT

I get 3 short beeps when I press the 'Power' button. Power does not come on (it's plugged in and there's power to the recepticle). The only other button that works is the 'Controls Lock/Unlock' which turns red when held for 3 seconds.

Posted by on

  • 3 more comments 
  • 012001 Dec 10, 2007

    Thanks for the reply guest 1. I had already tried unplugging, resetting the C/B, holding in the 'Power' button. I even opened up the machine to look at the CPU hoping to see a reset switch. Nothing has worked so far. It's likely something simple that will cost several hundred dollars to have a 'professional' fix...

  • 012001 Dec 10, 2007

    btw ... my model is WFW9200SQ Ser CST50067K7

  • Anonymous Oct 04, 2008

    I turned off several times, I keep pushing and pushing the power and still nothing. need solution!!!!!







































































































































  • Anonymous Mar 17, 2014

    ONLY HEAR 3 BEEPS WHEN I HIT THE POWER BUTTON, NO DISPLAY..THE ONLY BUTTON THAT WORKS IS THE LOCK/UNLOCK BUTTON

  • Anonymous Mar 21, 2014

    wont start, when start button is pressed it just beeps 3 times, door not locking

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine just did the exact same thing. I unplugged it, then plugged it back in, and it worked perfectly. Good luck!

Posted on Dec 10, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I start a Whirlpool duet HT washer?


plug it in, press power button (blue button on left) turn dial to desired cycle then press and hold the blue button on the right until u hear a click then relese. if it doesnt light up the display when u press power the washer is broken.

Mar 11, 2013 | Washing Machines

2 Answers

I have a whirlpool duet # gew9250pw1 it won't


my whirlpool dryer has power but does not start

Jul 02, 2011 | Whirlpool Dryers

1 Answer

Start button will not initiate on cycle. Get 3 beeps.


Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer2_bing.gif will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

Jun 20, 2010 | Whirlpool GEW9250 Electric Dryer

1 Answer

I have a duet ht washer.the control lock is on ,how do i cancel this? I have forgotten .THankyou Janet


To unlock the control lock press and hold the cancel button down for 5 sec or till you here a beep.

Good luck

Sep 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Beeps 3 times when Power button is pressed


hi im josh in cebu phils. the problem is your washer is on a short circuit. try to check the wires if it has no cut.or loosen. good luck.

Dec 30, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet ht wouldn't start


remove the lower front panel,3 screws,side up and off,there is a tech sheet inside on the panel that should help you ,let me know what you find-mike

Oct 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet HT Front Load Washer- won't start


remove the plug of the machine from the power outlet and plug it after 10minutes and then check .

if the frontpannel screen shows any error codes or any lights flashing check out this link

http://www.applianceaid.com/frigidaire_frontload_washer5.html

also check out this link for more help

http://www.applianceaid.com/frigidaire_frontload_washer.html

thanks.

Oct 12, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet HT WFW9200SQ Ser CST50067K7 Power Problem


I have the same problem. Did you ever find the solution to this problem?

Dec 10, 2007 | Whirlpool GHW9200L Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

723 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...