Question about Kenmore 20722
Hello, Your problem is going to be with your lid switch, this is located normally either in the control panel or about half way down on the right side under the lid. Once you have located the switch trace the wires back to the wire harness in the control panel. Disconnect the lid switch from the wire harness and with an ohms meter check for condinuity on pin 1 & 3 (the 2 outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good Luck!! Mike
Posted on Sep 09, 2009
Testimonial: "got me going in the right direction with a response less than 3 minutes after I posted my question. thanks so much!"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 05, 2013 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Dec 01, 2012 | Washing Machines
Jul 09, 2012 | Kenmore Washing Machines
Take a look at this tip I wrote on the no agitate or spin condition of your washer.
Oct 18, 2011 | Kenmore 22422 Top Load Washer
Oct 06, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Mar 27, 2009 | Kenmore 22422 Top Load Washer
Nov 13, 2007 | Kenmore 22422 Top Load Washer
Apr 26, 2007 | Kenmore 22422 Top Load Washer
306 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: