Question about HP PSC 2410 All-In-One InkJet Printer

2 Answers

Hp pc 2110 all in one printer- scanner- copier

I put in a new cartridge and it wont print. The screen repeatedly says "remove and check cartridge" I remove and check it...What do I check?, it's there and looks allright. I bought

Posted by on

  • 2 more comments 
  • dissat Dec 12, 2007

    Same problem. However, after visually inspecting same and replacing it (several times) The printer now states "The cartridge in the right bay is not recognized" . It is the original cartridge for petes sake!

  • Anonymous Feb 29, 2008

    replaced ink cartridge ...stating busy

  • Anonymous May 20, 2008

    I have unplugged it and reset it and i still get Remove and Check Cartridge

  • carolhfre May 23, 2008

    black inki won't print but all other colors will, have replaced with hp cartridge three times



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I subsequently purchased a new replacement cartridge and upon insertion the problem disappeared. Go Figure. ---Dissat

Posted on Dec 17, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try a reset hold down # and 6 buttons while unplugging then plugging printer back in.

Posted on Dec 14, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My printer was in storage for a year, I now have it out and put new cartridges in it and it said it needed to align, so it printed out the aligning paper however it then said scanner failure and the...

Do the following:
a partial reset by pressing and holding Cancel and the Left Arrow while plugging in the power cord.

Wait 30 seconds (which was originally designed by help desks so the clients would calm down).
Hold down cancel and LEFT arrow buttons on HP 2110, while plugging the power to HP 2110.
Release the cancel and LEFT arrow buttons.

Nov 11, 2010 | HP PSC 2110 Color Printer

2 Answers

Installed new black ink cartridge in HP PSC 2110 color printer, scanner, copier. Followed instructions to align cartridges. Printer printed paper that had additional instructions. Placed second printed...

hello, machine will need to finish calibration so it will not come back, so if machine failes it could be that the color cartridge is not printing, because this machine uses yellow to calibrate with.

Oct 06, 2010 | HP PSC 2110 Color Printer

1 Answer

RE: HP 2110 all-in-one printer. I have put in a new Black HP toner cartridge (color is OK). The printer then goes through the "Align Print Cartridges" process. After the cover page (which prints...

Turn off the printer
Clean the Scanner Glass with Lint Free Cloth ( drop 2-3 drops of water on Cloth, Squeeze it and Wipe the Scanner Glass.

Also try to switch/change the Wallsock/Surge protector socket since the Scanner bulbs are not getting enough power to scan the page

Jun 17, 2010 | HP PSC 2110 All-In-One InkJet Printer

3 Answers

Installing a new black ink cartridge and i keep

chech the part number of your cartriges, and also the expiration date for both cartridges

Mar 17, 2010 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Won't print: "remove and check color cartridge"

remove your new color cartridge and make sure you have removed the safety tape on the botton of the cartridge.

Mar 07, 2010 | HP PSC 2110 Color Printer

2 Answers

Print cartridge will not align

This could be an issue from remanufacturing. Try a new cartridge from HP.

Many manufacturers have hardware in the cartridge and the printer that tell the printer "new cartridge". When a cartridge is refilled, you can have that giving a "bad" message.

I wish that I could be of more help.

Cindy Wells

Feb 18, 2010 | HP PSC 2110 Color Printer

1 Answer

Ink Cartridge Alignment

On alignment sheet, do you see a line of yellow blocks?
And on next line do you see alternate block and yellow blocks?

(Without these, alignment fails)

If not, change the colour cartridge, re-print the page and repeat alignment.

Good luck...

May 26, 2008 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Printer problem

The cartridges in your printer might be loose or not snugly fit into its slots. Try removing them then return and fit the cartridges to turn off the flashing message.

Mar 29, 2008 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Hp 2110 All in One Printer

Does the machine ask you to "align" the print cartridges when you turn the machine back on? If the alignment page when finished printing is missing a key color (say yellow), then the alignment will not succeed.

Jul 29, 2007 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Scanner bar jammed by cartridge allignment

Any fix for this I have the same issue?

Dec 11, 2006 | HP PSC 2110 Color Printer

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides