Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

2 Answers

Power indication will not stay on after switch it on by front button or remote

Posted by on

  • david5page Sep 09, 2009

    The power light blinks 3 times. It was working fine until I moved Saturday sep 5th. I can get it to pulsate for 5 seconds by pressing the preset button however, it will not activate. Is there some type of power code that need to be entered in the remote??

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 213 Answers

How maney time it green lite blink.

Posted on Sep 09, 2009

Testimonial: "the power light blinks 3 times"

  • Robert Smith Sep 19, 2009

    bad flyback the part cost 24.37.00 you see the red wire come from it
    that the part you ned replace that and tv come by to life.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 8,457 Answers

Ur BD power board is dead.
U need the board rebuild or replace a new one.

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need remote code for orion tv


Hello

Three digit universal remote code for Orion are:
035/ 121/ 135
Four digit universal remote code for Orion Tv are:
0121 0135 0035


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NB: Switch OFF and switch ON your TV, with its FRONT PANEL POWER CONTROL SWITCH EACH TIME before tring an other code.
OK.

Mar 12, 2011 | Orion Televison & Video

2 Answers

Universal remote I need the code to a Sharp TV


Hello
Three digit universal remote code for Sharp TV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four difit universal remote code for Sharp tv are:-
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NB: Switch OFF and switch ON your TV with its front panel power ON/OFF switch each time before trying an other code.

Mar 01, 2011 | Televison & Video

1 Answer

Instructions to set up remote with Sayno TV


Hello

Here is the method for set up a Sanyo set with Philips Universal Remote Control [MODEL CL 034].

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
Codes are:

0506 0311 0612 0002
0428 0802 0412 0619
NB: Switch OFF your TV and switch it ON with its front panel power control switch each time before trying an other code. OK

Feb 27, 2011 | Universal Televison & Video

1 Answer

Need the remote code for this model tv


Hello

Three digit universal remote code for Panasonic are:-
003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171

Four digit universal remote code for Panasonic are:-
0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Note: Switch OFF and switch ON your TV with its front panel power control switch [Main power control] each time before proceeding for an other code.
OK.

Jan 20, 2011 | Panasonic PV-DM2799 27 in. TV/VCR/DVD...

1 Answer

I need the tv code for a jvc g series super multi 21 so I can program a remote


Hello
Three digit universal remote code for JVC are:-
013/ 054/ 055/ 060/ 065/ 067/ 089

Four digit universal remote codes for JVC are:-
0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Note: Switch OFF and switch ON your TV, with its FRONT PANEL POWER ON/OFF SWITCH, [Not by remote control handset]; each time before try an other code.
OK.

Jan 20, 2011 | JVC Televison & Video

1 Answer

Where is the mode button so I can sync the remote and the tv? what is the 3 digit code


Hello

Three digit universal remote codes for Sanyo are:-
004/ 013/ 049/ 108/ 110/ 180/ 209
Four digit universal remote codes for Sanyo are:-
0049 0097 0110 0004 0268 0012 0108 0180

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NB: Switch OFF and switch ON the tv by its front panel power control switch [Not by remote control handset] each time before an other code.
OK
Wish you Happy Peacefull 2011.

Dec 30, 2010 | Sanyo DS32224 TV

1 Answer

Need code for polaroid model ttm-2410 for one for all remote


Hello
Four digit universal remote code for Poloroid TV are:-

0182 0173 0133

NB: Switch ON and switch OFF the Tv by its FRONT PANEL POWER ON OFF SWITCH; NOT BY REMOTE CONTROL HANDSET each time before trying an other code.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Ok

Dec 29, 2010 | Polaroid TTM2410 TV

1 Answer

Dish Network Remote Coltrol and durabrand model 1304D tv 13" need to program the remote please help


Hello

Three digit remote codes for Duraband are:-
042/ 053/ 046/ 206/ 805/ 906

Four digit remote codes for Duraband are:_
0189 0135 0157 0051 0189 0053 0227 0456 0042

NB: Switch OFF and switch ON your tv, with its front panel power switch, [NOT BY REMOTE CONTROL HANDSET]; each time before trying an other code.

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
ok.

Dec 25, 2010 | Durabrand DWT1304 13" TV

1 Answer

HAI I AM MOHAMED I WANT A REMOTE CONTROL FOR MY 21"SUPRA TV 100 CHANNELS, THE MODEL NO IS:ST21B55FT.PLS HELP ME


Hello Mohamed

Four digit universal remote code for Supra are:-

0004 0082

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NB: Switch OFF and switch ON your tv by its front panel power switch [NOT BY REMOTE CONTROL HANDSET] each time before trying an other code.
ok.

Dec 22, 2010 | Televison & Video

1 Answer

Three digits code universal remote of konka k1391u 13" TV


Hello

Three digit universal remote code for Konka TV are:-

203 208 219 306 317 417

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
NB: Switch OFF and switch ON your TV each time with its front panel power control switch [NOT BY REMOTE CONTROL HANDSET], and wait for at about 30 seconds, between switch OFF and switch ON, before trying an other code.
OK.

Dec 20, 2010 | Konka K1391U 13" TV

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...