Question about Edimax BR-6104K Router (br6104k)

1 Answer

Cant connect on d internet

The tcp/ip logo on the properties does'nt have a color blue i just follow all d instruction of the manual still i cant connect in the internet

Posted by on

  • 4 more comments 
  • edwardallanf Feb 10, 2008

    i have almost same problem and my LAN icon indicates no connectivity or low resources

  • need help 26 Mar 04, 2008

    I setup my router following the manual directions and I can't connect to the internet.

  • arnel72 Jul 16, 2008

    well i already solve the problem:) if you have the same prob. ask me

  • gabichivu2 Dec 11, 2008

    my internet connection works fine directly from modem when i plug the cable in the edimax router i can't connect to the internet i have only local acces between the computers

  • mark_bonello Jan 03, 2009

    I also have that prob i have internet connection when i plug cable directly to the modem but when i use edimax router ther is no connection....... anyobdy can help??

  • Ryan Trumbull
    Ryan Trumbull May 11, 2010

    Can you get online when your computer is directly connected to your modem?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

My case if i direct the cable on single PC its work we have connection but when i use edimax i cant connect...unable to connect.

Posted on Mar 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find proxy server address


Changing TCP/IP settings Win 7 TCP/IP defines how your computer communicates with other computers.
To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow these steps:
  1. Open Network Connections by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
  2. Right-click the connection that you want to change, and then click Properties. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 25e7e385-9327-4f7d-aab0-afa5aaf952ba_49.jpgThe Network Connection Properties dialog box
  4. To specify IPv4 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
    • To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
  5. To specify IPv6 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
    • To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
  6. To specify DNS server address settings, do one of the following:
    • To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
    • To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
    f598cd96-6bf9-47be-942d-7d0b0afdbd88_47.jpgThe Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
  7. To change advanced DNS, WINS, and IP settings, click Advanced.

Mar 10, 2014 | Dell Latitude D600 Notebook

1 Answer

I cant get into the internet and i need to before the 27th of december i need the internet and i cant get what should i do


JUST TRY.does your net status already connected?. if your connected, try to open internet connection and click properties then double click INTERNET PROTOCOL(TCP/IP) mark obtain ip address automatically
and below obtain DNS server automatically or USE THE FOLLOWING DNS SERVER,
PREFERRED DNS 208.67.222.222
ALTERNATE DNS 208.67.220.220

Dec 26, 2010 | Video Game Consoles & Games

1 Answer

I have a easy notebook EPC P701, which has hgh speed connectivity with WI-FI. except I cant connect to a network. I cannot see any networks from the notebook and following he instruction manual it looks...


briang64
  • Rank: Guru computers_small.png
  • Rating: 88%, 95 Votes
It appears that your notebook has wifi capability. You need to be certain that your network settings are correct. You need to get to your wireless network settings. Follow these directions:

Go to My Network Places, right click on My Network Places to get a menu
Choose Properties on the menu, You will see a new window open
Look for the wireless network connection and right click on the wireless network to get a menu
choose Properties to open another window. Look inside the window for TCP/IP settings.
Click on TCP/IP and choose properties.

Make sure that "Obtain IP address automatically" and "Obtain DNS address Automatically" are both checked so that you are able to connect to your wireless router. That is the usual TCP/IP settings for most home networks.

I hope that this helps.

Brian

Nov 01, 2010 | Computers & Internet

1 Answer

Just install XP PRO sp3 on P4C800 board and current version of 3Com 3C940 onboard LAN. Installation went fine but LAN can not acquired network address and get no or limited connection.Therefore internet...


When your using Internet connection via LAN you need to configure the Internet Protocol (TCP/IP) Properties at the Network Connection Wizard. To configure the Network Connection just follow this steps:
1. Double click the My Computer from your desktop/screen.
2. At the left side of the My Computer menu click the My Network Places then click View Network Connections in the left side of that window also.
3. Double click the Local Area Connection and click Properties.
4. When the Local Area Connection Properties was appear select Internet Protocol (TCP/IP) then click Properties.
5. The Internet Protocol (TCP/IP) Properties are also apear, then click Use the following IP address and fill-up the following: IP Address, Subnet Mask, Default Gateway, Preferred DNS Server and Alternate DNS Server.
6. After all you fill-up click OK Button.
Note: Make sure that the IP Address you fill-up in your network connection are not the same with the other computer to avoid conflict. Just copy the configuration on the computer like: Subnet Mask, Default Gateway, Preferred DNS Server and Alternate DNS Server. Only the IP Address are unique to the other computer. Example; 192.168.0.5 that is the IP Address of last computer are connected in the network. The IP Address you able to use is 192.168.0.6, only the last digit of the IP Address your going to change.

Jun 04, 2010 | ASUS P4C800 Deluxe Motherboard

1 Answer

Dial up connection ends in error code 720, can't connect to the internet. Using a back-up pc that is terribly slow. would like to fix pc.


Error 720 - the connection attempt failed because your computer and the remote computer could not agree on PPP control protocol.

To resolve this issue, uninstall the TCP/IP protocol, remove the second WAN Miniport IP device, and then reinstall the TCP/IP protocol. To do so, follow these steps:
  1. Uninstall the TCP/IP protocol. To do so:
    1. In Control Panel, double-click Network and Dial-up Connections, right-click Local Area Connection, and then click Properties.
    2. Under Components checked are used by this connection, click Internet Protocol (TCP/IP), and then click Uninstall.
    3. Follow the on-screen instructions to uninstall TCP/IP.
    4. Restart the computer when prompted, but click No if you are prompted to allow Windows to enable a protocol.
  2. Right-click My Computer, and then click Properties.
  3. Click the Hardware tab, and then click Device Manager.
  4. On the View menu, click Show hidden devices.
  5. Under Network adapters, there should be no WAN Miniport IP devices. If a WAN Miniport IP device is listed, continue to the following step. If no WAN Miniport IP device is listed, go directly to step 16.
  6. Click Start, click Run, type regedit in the Open box, and then click OK.

  1. Locate the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}
  2. On the Registry menu, click Export Registry File, type backup-key in the File name box, and then click Save.

    Note You can restore the changes that you make to this registry key. To do so, double-click the backup-key.reg file that you saved.
  3. Click each of the registry subkeys under this key, and then view the Data column of the DriverDesc value to determine which of the subkeys corresponds to WAN Miniport (IP). For example, the 0005 subkey.
  4. Right-click the subkey whose DriverDesc value data is WAN Miniport (IP) (for example, right-click 0005), and then click Delete. Click Yes to confirm that you want to delete the key.
  5. Quit Registry Editor.
  6. Right-click My Computer, and then click Properties.
  7. Click the Hardware tab, and then click Device Manager.
  8. On the View menu, click Show hidden devices.
  9. Under Network adapters, right-click WAN Miniport (IP) and then click Uninstall. Click OK to confirm that you want to remove this device.
  10. Reinstall the TCP/IP protocol. To do so:
    1. In Control Panel, double-click Network and Dial-up Connections, right-click Local Area Connection, and then click Properties.
    2. Click Install.
    3. In the Select Network Component Type dialog box, click Protocol, and then click Add.
    4. Under Network Protocol, click Internet Protocol (TCP/IP), and then click OK.
    5. When the protocol is installed, click Close.
  11. Reset the modem by turning the power off and then on, or for an internal modem, restart the computer.
  12. Test your Internet connectivity.

May 02, 2010 | Acer Aspire T650 PC Desktop

4 Answers

How do I change my I.P. addess...I'm having compatibility problems with my wireless router and cant get on line


1.

Control Panel
Network Connections
Wireless Connection
Properties
Make sure Internet Protocol TCP/IP is set to "Obtain an IP address automatically"

2.

Start/Run
CMD<enter>
ipconfig /release<enter>
ipconfig /renew<enter>



Nov 27, 2009 | Compaq Presario 700 470024-192 Notebook

1 Answer

How do I repair a URL address


GO IN CONTROLPANEL-NETWORK CONNECTION
RIGT CLICK ON CONNECTION LOGO
SELECT PROPERTIES
SELECT TCP/IP (gENREL)
SELECT PROPERTIES
TYPE IP ADDRES
SUB---------------
GATEWAY---
DNS -1
DNS-2
THEN OK
NOT USE USUALLY REPAIR CONNECTION OPTION
THANKS

Oct 10, 2009 | Computers & Internet

1 Answer

I have a zyxel p66ohw router connected to my pc via an ethernet card, everything is fine untill my son logs on with his playstation 3, or my wife logs on with her laptop then i cant connect everytime i try...


Make sure that your TCP/IP properties are set to "Obtain an IP address automatically". If you still cannot connect after you change that, and after waiting for a couple of minutes, then open a command prompt and type "IPCONFIG". Make a note of the address at "Default Gateway . . . . . . . . . :" That's the address you need to go to to access the modem's settings..You'll need an ID and password. These would be in the modem's manual.
---to find tcp/ip properties---
It depends from PC to PC, but, try this:
Start (Bottom left of your screen)
Settings
Network Connections
Local Area Connection
Properties
Internet Protocol TCP/IP
Properties

That's how it is on my PC.

Oct 10, 2008 | Computers & Internet

1 Answer

Settings for my browser


If you use Internet Explorer: Go to Start, Settings, Control Panel, Internet Options, Connections, and the LAN Settings button. Clear all checked settings in this window. Then, open your browser and select the Tools menu. Under Internet Options, click on the Connection tab and make sure that "Never dial a connection" is selected. If possible, remove all the connection settings. If you use Netscape Navigator: Go to the Edit menu and select Preferences. Go to Advanced, Proxies, and click "Direct Connection to the Internet." Also check for the following. If you are running Windows 95 or 98 or ME: Click on the following tabs and write down the settings you find. Right-click on Network Neighborhood and select Properties. Select "TCP/IP" for your network adapter. Then click Properties. Click the IP Address tab and select "Obtain an IP address automatically." Under wins configuration, click on use DHCP for wins resolution Click the Gateway tab. If there are any "Installed gateways," highlight them and click Remove. Click the DNS tab and select "Disable DNS." Click OK If you are running Windows NT: Write down any settings you see throughout the tabs for future reference. Right-click on Network Neighborhood and select Properties. Click the Protocols tab, highlight TCP/IP, then click on Properties. Click the IP Address tab and select "Obtain an IP address automatically." Remove any gateway settings you see. Click OK. If you are running Windows 2000: Right-click on My Network Places. Click on Properties. Right click on the Local Area Connection icon that connects to the Router. Click on the Properties button. Highlight TCP/IP, then select "Obtain an IP address automatically." Click OK. Go the the advance tab, click on wins, check the box use NetBios settings from the DHCP server. If you are running Windows XP: Click on My Network Places. Click on view network connections. Right click on the Local Area Connection icon that connects to the Router. Click on the Properties button. click on the advance tab, make sure the internet connection firewall is not checked, click ok,Highlight TCP/IP, then select "Obtain an IP address automatically." Click OK.

Feb 16, 2006 | Belkin (F5D6230-3) Wireless Router

1 Answer

How can i verify??


If you use Internet Explorer: Go to Start, Settings, Control Panel, Internet Options, Connections, and the LAN Settings button. Clear all checked settings in this window. Then, open your browser and select the Tools menu. Under Internet Options, click on the Connection tab and make sure that "Never dial a connection" is selected. If possible, remove all the connection settings. If you use Netscape Navigator: Go to the Edit menu and select Preferences. Go to Advanced, Proxies, and click "Direct Connection to the Internet." Also check for the following. If you are running Windows 95 or 98 or ME: Click on the following tabs and write down the settings you find. Right-click on Network Neighborhood and select Properties. Select "TCP/IP" for your network adapter. Then click Properties. Click the IP Address tab and select "Obtain an IP address automatically." Under wins configuration, click on use DHCP for wins resolution Click the Gateway tab. If there are any "Installed gateways," highlight them and click Remove. Click the DNS tab and select "Disable DNS." Click OK If you are running Windows NT: Write down any settings you see throughout the tabs for future reference. Right-click on Network Neighborhood and select Properties. Click the Protocols tab, highlight TCP/IP, then click on Properties. Click the IP Address tab and select "Obtain an IP address automatically." Remove any gateway settings you see. Click OK. If you are running Windows 2000: Right-click on My Network Places. Click on Properties. Right click on the Local Area Connection icon that connects to the Router. Click on the Properties button. Highlight TCP/IP, then select "Obtain an IP address automatically." Click OK. Go the the advance tab, click on wins, check the box use NetBios settings from the DHCP server. If you are running Windows XP: Click on My Network Places. Click on view network connections. Right click on the Local Area Connection icon that connects to the Router. Click on the Properties button. click on the advance tab, make sure the internet connection firewall is not checked, click ok,Highlight TCP/IP, then select "Obtain an IP address automatically." Click OK.

Feb 16, 2006 | Belkin (F5D5230-4) Router

Not finding what you are looking for?
Edimax BR-6104K Router (br6104k) Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edimax Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Rommel Balcita

Level 3 Expert

749 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you an Edimax Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...