Question about Mitsubishi Televison & Video

2 Answers

Mitsubishi Diamond model WS-65813 The system light (on light) blinks fast. The System Reset button has no effect. Unpluging & pluging the set in has no effet. Then, for no known reason it starts woring again after an extended period of just being left on.

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

After plugging the TV in, it normally takes about two minutes for the processor to boot before the light will stop blinking and the TV will turn on.

Posted on Sep 09, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This happened to my Mitsubishi last year. The unit has a capacitor (or two) going out. The capacitors normally charge up and the TV does its boot process. In this case they are not holding their charge until they warm up a bit. That is why eventually it will come on. The problem will not get better. I called service, they came out, replaced 5 capacitors, and the unit works great again. Mine was under warranty so it didn't cost me.

Posted on Nov 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a mitsubishi model WS-55511. The green light keeps blinking. Have reset by unpluging and then pluging back in and holding the reset but for 5 seconds and press the power button. worked once, but...

TWO possible reasons for the blinking light:

1. The DM unit (caps and or fuses) are bad---no longer made and only (to my knowledge) PTS electronics repairs/rebuilds them.

2. Less likely but Possible: remove front speaker grill and inspection plate behind it----locate the two bundles of wires from front keyboard on set and follow them down and to the right---unplug both plugs and plug set in and wait 70 plus seconds and try to turn set on with Mitsubishi remote.

The blinking light is the DM trying to boot up--if set works with front keyboard unplugged---the tiny reset switch on it is bad.

If set does NOT work that way DM UNIT IS BAD.


May 03, 2011 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Diamond ws-65813 front light blinks and will not come back on.

I'm having the same problem as with most of the people....I went to and they pretty much pin pointed the problem and it in the DM board and there are capacitors that needs replacing but its better than replacing the bulb which it will cost ya around $ if u want to try it on ur own get this repair kit with capacitors included..... Good Luck !!

Nov 06, 2009 | Mitsubishi WS-65813 65" Rear Projection...

1 Answer

Mitsubishi WS-65511 HDTV

Well, this is how that set is supposed to work. After it is plugged in the LED should blink for 70 to 90 seconds. That is normal and is the amount of time it takes for the Digital Module to boot up. During 'boot up' time the set is inoperable. Once the LED stops the set should operate normally. If the blinking never stops there is a problem with the Digital Module. If the blinking does stop but the set wont come on there are other things you can do to narrow down why the set is not working.

Jun 02, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Mitsubishi TV WS-65713

you can get the service manual and detailed instructions on that repair by going to the following link.

May 31, 2008 | Mitsubishi WS-65813 65" Rear Projection...

2 Answers

Mitsubishi WS-65511 HDTV

How many times does it blink? Or is it a continuos blinking that doesnt stop? Let me know and I will be able to help you with it.

Apr 30, 2008 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Timer light blinks continuosly,cannot turn on the set

Bad DM module = replace or repair by skilled Mits tech only...
Research my solutions or comment,please....

Oct 16, 2007 | Mitsubishi WS-65813 65" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1216 Answers

The Knight
The Knight

Level 3 Expert

75276 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides