Question about GE Washing Machines

2 Answers

My GE Profile top load washer won't hold water

My GE Profile top load washer won't fill with water, the water runs, and runs, but just drains then finally the timer gets to 1 minute and it all stops. Can you help?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 3,361 Answers

Your drain line is too low or has a blocked air gap. Take the drain line out of the drain. Hold it up high and turn the washer on to fill. If it fills and begins agitation,repair the drain line problem.

Posted on Sep 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The solenid valve controlled by the float is faulty

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my GE washer get stuck in Drain cycle??


for one G.E not a good choice mostly junk. the timer may indeed be bad if its sticking at 1 point and u can move it manually?

Feb 27, 2015 | GE GTWN2800DWW 3.9 cu. ft. capacity top...

1 Answer

Top loading GE color profile washer (wpse4200a) won't fill


You may have a water supply problem. There is a mesh screen in the hoses where they hook to the washer. Make sure they aren't clogged up

Sep 19, 2009 | Washing Machines

1 Answer

GE Washer does not drain or spin


Inspect the drain hose for kinks
Test the timer control
Test the lid switch (some models)
Inspect the water pump
Inspect the drive belt (belt drive only)
Inspect the motor coupler

Jul 15, 2009 | GE WDSR2080D Top Load Washer

1 Answer

1.5 year old ge profile washing machine will not agitate or spin


Timer seems to have gone bad. Manually move the timer to make the dryer spin. If you get it to spin and drain then it's your timer.

Jul 01, 2009 | GE WDSR2080D Top Load Washer

1 Answer

Washer won't wash


Hi!
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

May 30, 2009 | GE Washing Machines

1 Answer

GE Profile washer will not drain. (DOES SPIN)


take the front off the washer take the two hoses off the pump youll probably find where its stopped up

Apr 24, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

GE Profile will not run cycles. Runs water continuously.


OK, i would do a hard reset by unplugging for 2 minutes. if the problem still exists, this is defiantly a malfunctioning relay. it will have to be replaced.

Mar 06, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

GE washer won't fill with cold water


Cold water pipe had become frozen. FYI this model of washer has a nice feature whereas you can test each component i.e. valves, by setting the timer and reading the LED's on the front panel. Instructions are in the schematic.

Jan 17, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

Stopped mid wash cycle,no drain,no spin, will not go to next cycl


water pump blocked with nylon stuffing from old pillow.removed front panel from hinges under the lid. water pump at the right hand corner removed hose then removed 2 cups of nylon threads and stuffing forced into pumps small openings where it was compacted to a solid mass.

Jan 05, 2009 | GE Profile WPRE6100G Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...