Question about 2wire (1000-000005-002) 802.11g/b Wireless Adapter

1 Answer

Wirless router not working

Im was unable to log on the internet on my 2wire router. when I checked my signal with the 2wire name it wasnt there. I checked my router the power light was flashing green the wireless light was green but no dsl light. I unpluged the power then re plugged, same thing then later the power light was red and still is. I cannot log on wireless or wired.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

It seems to be a problem with your ISP.May try these steps.

1. disconnect the router from the computer and the modem.
2. now connect the Ethernet cable to the modem & to the computer and see if that works.
else contact your isp.


for more help.

wirless router not working - moz-screenshot.pnghttp://www.ikarmatech.com

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant go wirless


1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox). If you have a yellow flashing light at the "INT" or Cable then you will have to check with your ISP to check connectivity to your router.
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router
9. cell phones, cordless phones, digital TV's, can affect the data signal from a router. Also distance from the router can be a factor. If your router is in a basement place the router to a upper floor and center it in the room.

Sep 28, 2010 | Linksys WRT160N Wireless Router

1 Answer

Compaq is not able to connect to the internet have 2wire dsl from att which works find with my desktop but not laptop. Please help


1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router
9. cell phones, cordless phones, digital TV's, can affect the data signal from a router. Also distance from the router can be a factor. If your

Sep 09, 2010 | Computers & Internet

1 Answer

Why does my computer say LAN is not connected but my ethernet cable is plugged in?


1. You possibly have lost the IP address from the ISP to your router and you will need to release/ renew the IP or you have a damaged Ethernet cord ( rare) but none the less could be damaged.
2. unplug the Ethernet cord from the connection at the wall for a few seconds and then plug it back in the wall connector.
Then try your connection. Call your ISP ( internet service Provider) and check the line to see if you have proper signal to the router.

Further instructions:
1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop/desktop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Jul 27, 2010 | 2wire (1000-400108-001) Router

1 Answer

Using 1000SW, I get report of:- Connection Status DSL Signal: DSL found on Line 1 PPP Login: Login successful Internet Address: An Internet address was verified ISP Link: Domain Name Server...


When you get a 'cant connect to configuration server', dont worry about it, thats 2wire's configuration server. If you have a 1000sw, then you've been a customer for a long time and have been registered for years and dont need the configuration server. Both you and the 2wire have been configured for years. The 2wire is trying to reach the configuration server because you set it up again, im thinking you moved, changed phone lines, or changed service.

The 2wire configuration server is to set people's 2wire's up for the first time only, and even then it doesnt matter unless you call technical support, and then they can still help you by getting the serial number off the device when that happens years later.

spin

Sep 04, 2009 | 2wire HomePortal 1000 Router

3 Answers

I cant remember my network security key


Your both stupid the NETWORK KEY is written UNDER THE ROUTER.

Jul 12, 2009 | 2wire (1000-400108-001) Router

1 Answer

Low to no signal strength


Try agusting the wirless properties for your wirless card. You will need to go uder start then go to conect to and the show all conecsions. The you will need to right clcik on the wirless conecsion and go to properties. Now you will click the button that says configure. I hope this helps

Jan 01, 2009 | 2wire HomePortal 1800HG Router...

3 Answers

Cannot get 2wire to work on my iphone! :(


Try this one:

>on ur WIFI networks, click "other..."
>then manually type in ur network name (if its set to default, it should be 2WIRE and the last 3 digits of ur SN. It is case sensitive so type the name exactly how it looks like.)
>make sure that the setting is set to WEP
>on the password box, enter a dollar sign/$ first and then the 10 digit code under ur 2wire

keep me posted on this one

Aug 30, 2008 | 2wire (1000-400106-003)

1 Answer

Microsoft Wireless-G Base Station MN- 700


Just remove the router and reinstall it. it will ask you for new Base name Etc and new wirless network name with new security key codes.

Aug 20, 2008 | Microsoft Broadband Networking MN-700...

1 Answer

2WIRE 2701 router


You must log on to the browser interface of the router (usually for 2wire they use 192.168.1.254) run the set up wizard it will come to a screen which asks for a key code, this key code is provided by your ISP, you can try one of these and see if it works
if you have a PPPOE connection (you have a user name and password to log on to the internet with use this one.

5225-26Q4-2262-22AS-B28F

if it is not PPPOE use this

5225-26P4-6262-22AS-B2E7

to manually configure the router use this

5225-2374-WG62-22AS-BJ7P

If these do not work call your internet provider and ask them for the key code.

after that you should be all set.




Aug 04, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Unable to access homeportal, but internet is ok?! (2wire 1800hw)


I had the same problem. I reset the home portal to factory setting and uninstalled the 2wire software from my main computer. I then reinstalled the system using installation cd that came with 2wire.

Jan 21, 2008 | 2wire HomePortal® 1800HW Router...

Not finding what you are looking for?
2wire (1000-000005-002) 802.11g/b Wireless Adapter Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...