Question about Tricity Bendix AW1000W Front Load Washer
Our Tricity bendix washing machine is over a year old, and now the dial wont turn when washing even though the suds are still being used. The drum still turns, can anyone help??
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this could either b the motor brushes or the timer check the brushes first they r mounted on either side of the motor unplug the machine b4 u start good luck
Posted on Aug 26, 2007
If you have multimeter and can use / 1 wire = live feed 1 wire is switch, 3rd is a netural idea is door lock gets 240 volt live netural feed energises the lock which in turn switches feed over to other connection..look at interlock to get idea what wire goes where....
Posted on Oct 31, 2009
It could be one of the E30 codes which would relate to the pressure switch or an earth fault on the heating element there could be a wiring fault or p.c.b. fault check wires off heater at bottom rear of machine,remove back plate 4 screws.Hope this helps.
Posted on May 07, 2010
Hi from retired Englishman in SW France,
Try this ;-0)
Many machines will not even go to rinse or spin or release the door lock if there is any water still left inside.
I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter- so many 'faults' are caused by blocked filters.
Following are my complete and hopefully 'coverall' pre-typed guidance notes for checking both the drain motor filter and the drain motor ;-0)
REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT (alternatively use a wet vac as sensibly suggested by VinnyB1234!)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!). These panels are either held on by (plasic) screws or will just pull off. Most filters are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play.
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning.
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
Posted on Oct 06, 2011
Tips for a great answer:
Feb 25, 2016 | Tricity Bendix Washing Machines
Sep 29, 2015 | Tricity Bendix AW1000W Front Load Washer
Aug 25, 2012 | 3M Washing Machines
Apr 23, 2011 | Tricity Bendix Washing Machines
May 07, 2010 | Tricity Bendix AW1200 Front Load Washer
Oct 31, 2009 | Tricity Bendix AW1000W Front Load Washer
Nov 25, 2008 | Tricity Bendix AW1054 Front Load Washer
Oct 17, 2007 | Tricity Bendix 24 in. DH102 Free-standing...
Aug 26, 2007 | Tricity Bendix AW1400W Front Load Washer
31 people viewed this question
Usually answered in minutes!