Question about Fuji FinePix S3000 Digital Camera

2 Answers

I installed S3000 software for Windows XP on my Windows Vista. Now it won't run. I downloaded the driver fix for Vista but something is blocking the program from running - it says: Windows 4.1 has stopped working. Can't get past it. Need to get these pics of my camera and emailed out for a job bid! Finepix shows all of my pics just fine, it just won't upload off my camera. Please help!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,187 Answers

You don't need the software to download the pictures fromthe camera to your computer.

The pictures are on the memory card in the camera.

Two ways to get them:

If you connect the camera to your computer via the USB cable, go to "Computer" on your desktop. You will see a drive letter (probably E) that says "Removable Disk" .
You can click on that folder and keep clicking on any folder that comes up on Drive E (or whatever the drive letter is). The pictures are there. Copy them from Drive E to the "My Pictures" folder in "My Documents".

You can now get to the pictures in My Documents \ My Pictures...


Second way:
Remove the memory card from the camera and use a USB "CARD READER" from Radio Shack ($12), or other similar store. Take your camera there so you can be shown how to use the card reader.

Hope this helps!







Posted on Sep 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,806 Answers

Hi,
Sounds like a compatibility problem related to Vista.
If your pics are stored on a camera card then i recommend that you purchase a card reader/writer and pop the camera card in that to transfer the pics to the computer.
They are very cheap at around $2( £1) and you can get them anywhere from places like PC World, radio shack etc.



Regards.

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Uninstalled the HP6300C series software since it no longer worked wirelessly. However, we cannot re-install the software. We have Windows 7 OS, the software indicates Xp and Vista. Could this be the...


Access the manufacturer's web-site: http://support.hp.com
Enter the model-number of the printer, and do the search.
Select Downloadable Device-Drivers.
Select Windows 7.
Download the device-driver.
Install it.

Jul 13, 2011 | Office Equipment & Supplies

1 Answer

I want hp psc 1315 all-in-one printer scanner copier Software & Driver




Here are thedrivers . When you click on the links, give it a minute and they will'pop-up' on your screen. When you click 'Save' the driver package willbegin to download. OS Type Version Date Added File Size File Type Download Link (About) Windows XP Driver 4.2.0 - Basic 2008-05-17 48.54 MB exe HP PSC 1315 Windows XP Printer Driver Download Windows 2000 Driver 4.2.0 - Basic 2008-05-17 48.54 MB exe HP PSC 1315 Windows 2000 Printer Driver Download Windows XP 64-bit Driver 1.0 - Beta 2008-05-10 58.43 MB exe HP PSC 1315 Windows XP 64-bit Printer Driver Download Windows Vista 64-bit Driver 080.001.237.000 2008-05-13 163.07 MB exe HP PSC 1315 Windows Vista 64-bit Printer Driver Download Windows Vista Driver 080.001.237.000 2008-05-13 163.07 MB exe HP PSC 1315 Windows Vista Printer Driver Download Windows 7 Driver 13.1.0 2009-12-04 362.68 MB exe HP PSC 1315 Windows 7 Printer Driver Download Windows 7 64-bit Driver 13.1.0 2009-12-04 362.68 MB exe HP PSC 1315 Windows 7 64-bit Printer Driver Download ALTERNATIVEDOWNLOAD LOCATION.
Note: These are LARGE files and may take some time to download.

Save the driver file somewhere on your computer where you will be easily ableto find it, such as your desktop.

After downloading, go to the location where you saved the file and double clickon the file. Then simply follow the on-screen instructions for installing thedriver.

HPPSC 1315 Windows 7 Printer Driver Download

HPPSC 1315 Windows 7 64-bit Printer Driver Download

THE HP SOFTWARE IS AVAILABLE THROUGH YOUR OPERATING SYSTEM. ON WINDOWS CLICKSTART AND THEN SELECT THE WINDOWS FAX AND SCAN ICON.

Software: Download optionsand information Description: clip_image002.png This software installs a copy of the help files onto your computer. Install this software if you did not install from the CD or if you did not install the full featured version of the software. Do not install this software if the help files for the HP PSC 1315 are already installed on your computer.

To see if the help files are already installed on your computer, check the following destination:

Windows XP: On the Windows taskbar, click Start, click All Programs, point to HP, click PSC All-In-One 1310 series, and then click Help.

Windows Vista: On the Windows taskbar, click the Windows icon, click All Programs, point to HP, click PSC All-In-One 1310 series, and then click Help. Details andspecifications File name: clip_image002.png MaggiMinus_Installer_24Nov08.exe [1/1, 24.91M] System requirements: clip_image002.png No additional prerequisites Released: clip_image002.png 2008-12-04 Version: clip_image002.png 1.1 Compatibility: clip_image002.png Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows XP 64-Bit Edition, Microsoft Windows XP Fix/Enhancement: clip_image002.png Updated the file to make the help files available from the Windows Start menu after installation is complete.

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-66177-3&lc=en&dlc=en&cc=us&os=228&product=374568&sw_lang=&key=null&site=null

Apr 13, 2011 | Computers & Internet

1 Answer

No Audio Sound RealTek Won,t Install?


Here is the driver link

1.For windows XP

http://cdgenp01.csd.toshiba.com/content/support/downloads/qg600audiox.exe

2.For windows vista

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_audio_sigmatel_25601A.exe

According to me, you are using windows xp as there won't be any problem with windows vista.

The sound card you are using is high definition audio.so you need to download Microsoft UAA Bus Controller Software.Install this first and installed the driver for windows xp.

here is the link for Microsoft UAA Bus Controller Software

http://download.cnet.com/kb888111-exe/3000-2110_4-104699.html

This will solve it

Dec 16, 2009 | Toshiba Qosmio G35-AV600 Notebook

2 Answers

I need to install/update my Canon Pixma iP1700 driver but everytime I run the supposed correct driver/update it constantly fails. This printer worked perfectly on my old printer with Windows XP but I...


Did you do a upgrade to vista from xp? Or is the computer with vista a different computer? The reason why I ask is if you did an upgrade the old drivers and software for xp may still be in the system. The first thing I would do is go into the device manager and remove the printer and un-install any software for the printer. Re-boot the computer and windows vista should detect the new hardware. I would let vista check online for the driver and install it. If it cant't find one the choose the driver you downloaded online. After that then try installing the printer software. Also make sure that when you go to print something that your printer is set up as the default printer.

Sep 06, 2009 | Office Equipment & Supplies

1 Answer

Update software from xp to visa based machine


You may go to the Fujifilm support site where you could download the appropriate programe or softerware compatible with Vista.
Here's a link to help you:
http://www.fujifilm.com/products/digital/download/index.html

Before you download and install the new program, do uninstall the earlier version.
Hope the aboe helps. do let me know.

Mar 03, 2009 | Fuji FinePix S3000 Digital Camera

3 Answers

Hp officejet 5610v all in one insallation software for windows vista


Try this link. It is the full intall file for the all in one being run on a Vista Machine. It worked fine for my installation.

Muck around on the site for a bit, and you can also find the same install file for Windows XP.

Good Luck

http://hp.driversdown.com/hp-drivers-download/HP-Officejet-5605-5610-5610v-5610xi-All-in-One-Driver-080.001.237.000-for-Windows--Vista-(32-64)_9168.shtml

Jul 22, 2008 | HP OfficeJet t45 All-In-One InkJet Printer

5 Answers

My laptop contains windows vista and i want to install Windows XP


i am using toshiba satellite l300model laptop. My laptop also contains windows vista. i want to install Windows XP as well. Some of my music software does not support Vista. Can you
please help me on how can i install Windows XP and how can i download the
XP drivers. I... Read more

May 20, 2008 | Computers & Internet

2 Answers

Navigator for pixma mp500


his product can be used with Windows Vista.
  • To use it with Windows Vista, install the software for Windows Vista.
  • The Windows XP software for your product cannot be used under Windows Vista.
  • Easy-WebPrint and PhotoRecord do not support Windows Vista.
Upgrading from Windows XP to Windows Vista :
Before upgrading your OS from Windows XP to Windows Vista, delete / uninstall all the Windows XP software first; then, upgrade the OS to Windows Vista and install Vista software.
If you have already upgraded your computer's OS to Windows Vista :
Delete / uninstall Windows XP software before installing Windows Vista software.
You can download from
Driverscollection.com

Mar 16, 2008 | Canon Pixma MP500 All-In-One InkJet...

3 Answers

How to install driver in preinstalled vista in notebook OR download xp driver


No vista drivers will not be supported. Recently i did the same thing and ran into troube getting back to vista. Your best bet is to download software updates that are compatible with vista, most things are now. Or if you want to install something if you right click the intall file first and got to properties, then compatibility and change it ro run in xp sp2, apply, ok. see if this helps

Dec 06, 2007 | Microsoft Windows XP Professional With...

4 Answers

Changing from windows XP to Vista


Unfortunately there is no fix for users of version 3 who have upgraded to vista.
The version 4 of Artista software does work in Vista. I have tested this and it appears to me to be related to the software "dongle" protections.

Nov 29, 2007 | Bernina Artista 180

Not finding what you are looking for?
Fuji FinePix S3000 Digital Camera Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...