Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Will not spin

My washer is not working its a kenmore 80 series it will not spin and makes a horrible noise on the spin cycle.....please help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 999 Answers

Check the motor coupler, or the drive block may be spinning on the basket drive. Some of these would break loose. Eric

Posted on Sep 08, 2009

Testimonial: "that worked but now its smells like something is burning on the wash cycle"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Kenmore 80 Series is making loud noises during washspin


Hi, Make sure the washer is solid to the floor. To level the washer, Put your foot against the front panel at the floor and tip the back of the washer toward you. Then set the washer back down and the rear legs should self adjust.
Hopefully this will stop the washer from shaking.

Vic

Jul 05, 2009 | Washing Machines

1 Answer

Washer wont spin in the spin cycle.Washer was full of water and making a buzzing noise.If you have any suggestions what it might be that would be great. Kenmore 80 series washer about 11 years old.


sounds like the lower bearing on the trans mission shaft is seizing up on you. had a frigedair that did the same thing. i took it apart to replace, but could not buy separate. it only came with a purchase of a new transmission,which ran $175- 275. so i junked it out. washer was only 5 years old.

May 29, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 Series washer will not spin; MOD#110-22882101


you need to replace the motor coupler between the motor and the trans.,let me know if you need more help,mike

May 26, 2009 | Washing Machines

1 Answer

Machine does not spin, it only makes a horrible racketing noise


Sound like you have a busted coupler .It is located between the motor and trany.Cheak inbetween .hope i helped.:)

May 18, 2009 | Kenmore 22422 Top Load Washer

6 Answers

Looking for a Kenmore washer manual


The following link explains step-by-step how to replace the lid switch on a Kenmore Top loader:

http://www.fixya.com/support/r385198-replacing_lid_switch

This is a simple repair. If you have any questions, or need additional assistance, please let me know.

Apr 03, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series washer not spinning/draining


The lid switch is failed.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 17, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 series 110 washer making loud noise during final spin


Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.

Dec 21, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series washer make high pitched whining noise


cold water screen in hose was half plugged causing it to either shut off the spin cylce due to lack of water or increase the spinning speed.
Hope this solves the problem.

Dec 10, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series makes noise in sping cycle


Its the transmission. Try to find a used appliance store in your town. Most save used parts and you should be able to pick up a used tranny for around 100 bucks.

Nov 14, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2183 Answers

fordexpert

Level 3 Expert

5522 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...