What wall mount do I need for a Hisense 20" LCD. Is it VESA compatible?

you can buy a wall mount for under 12 bucks. Or alternately you can buy an VESA 100 mm compatible stand for about 30 bucks
There're are out there lots of solutions for LCD, arms for mounting in desk, wall or poles.

Your TV has a standard VESA compatible mounting arrangement, 4 screw points in the back of the TV, You can buy a standard Gereric LCD Wall mount and it will be compatible with your TV.
Either Ebay or your local appliance/electronics/home improvement store will have them.

Hi,
Just go to the link you will find the wallmout for your tv.
Flush Wall Mount Bracket



Ajin

Most if not all tv's are VESA compatible. All wall mounts are VESA compatible, meaning you can buy any wall mount you see fit to mount your tv.
I'd look into Sanus brand mounts, they're pretty decent.

Hi mona_77a,
You can find the manual for your TV here.
Your Thomson TV is compatible with a VESA FDMI (Flat Display Mounting Interface.)
These typically use "VESA screws."
VESA screws tend to be metric sizes of M4 (0.7mm pitch). The length is typically 10mm, but would depend on the bracket (if you don't have a gauge handy, just put a small stick of some sort in there and mark it off with a felt pen, then measure).
Washers are a really good idea, especially if you decide on thumbscrews with plastic heads.
You may be interested in eHow's tutorial on how to mount a flatscreen TV to a wall. This is for a 42 inch screen, but the same rules should apply with a 32 inch.

• Open Link in New Tab
• Download

It is wall mountable with a VESA Mount: 400 x 200 mm according to the installation guide (600 x 200 mm in the specs). The depth without stand is not given; other Magnovox TFT LCD televisions are about 5-6" in depth (4.9" for the 42MF439B/F7 )

A compatible wall mount is here: http://amazon.skakawack.com/Silver-Tilting-Wall-Mount-Bracket-for/M/B0019D4K6M.htm?traffic_src=froogle&utm_medium=organic&utm_source=froogle .

I hope this helps.

Cindy Wells

do you have the wall bracket? is it vesa compatible?

the TV will mount to the wall via the VESA screw mounts on the back of the LCD. If it is a smaller, monitor sized LCD then the screw pattern will be either 75x75mm or 100x100mm. On larger TVs is it usually 100x200mm. Sometimes the base is screwed into this mount and othertimes to the bottom. Simply unscrew it from the screen. Be sure that the wall mounting kit can handle your LCDs VESA screw pattern, screen size and screen weight.

yes to find proper mount google 19av500u wall mount PLEASE make sure it is screwed into a 2-by-4 in wall