Question about Kenmore 3.8 cu. ft. HE3 Front Load Washer

2 Answers

HE3 washer Control malfunction?

HE3 washer seems to have a mind of it's own. To start a wash, we press Normal cycle, the machine changes that setting to Heavy cycle and other Options&Modifiers cannot thereafter be changed. Sometimes all this can be cleared by the CANCEL button, sometimes not? Bad control board? Thanks!

Posted by on

  • studiostacie Dec 19, 2008

    We have the same problem. We've done some things that seem to have fixed it temporarily. We took the top off and unplugged the ribbon cable and plugged it back in. Sometimes that worked, sometimes it didn't. 

×

Ad

2 Answers

Don't buy these **** washing machines anymore, i won't i have had trouble with myne since i bought it brand new

Posted on Mar 06, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 96 Answers

Bad control board is most likely problem.

Posted on Feb 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore HE3 stuck in rinse cycle


my wife was doing laudry with he3 and when it quite the door would not open.tried to restart a new cycle and it would not start.I unplugged the washer and let sit for 2 min.replugged it in and it started to work.I hope this helps you.

Apr 22, 2009 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Kenmore HE3 washer emits steady, constant beeeeeeeeeeeeeep


Depending on how your washer controls the beeper, it could be a stuck relay or a fried transistor.

Jan 17, 2009 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

My Maytag Washer


Hello
Welcome to fixya.
I'm Huuum and happy to assist you,

The washer is equipped with a lid switch failure detector. If the lid switch
should malfunction, the detector will stop operations for your safety.

Read below

First,turn the control dial to proper cycle and pull dial out to start the washer. If
equipped with buttons, be sure they are fully depressed.
Close lid and pull dial out to start the washer. For your safety, washer will
not agitate or spin unless the lid is closed.
The washer is equipped with a lid switch failure detector. If the lid switch
should malfunction, the detector will stop operations for your safety. Call for
service.
Pauses are normal. Wait and see if the washer will start again.


Please remember to leave a rating before you go!
Thank you

Sep 16, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Kemore HE3 front load washer won't start


Check you door latch. When you open the door, there should be a black square hole on the frame and a black round hole above it with a pin sticking out. The pin is probably broken off and the door latch assembly needs to be replaced.

Jun 03, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

HE3 Front loader Controls Locked


Try 'end of cycle' pushed down till the light goes off. Or locate the button with diagram of 'lock', & push down till the light goes off.

Dec 24, 2007 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Error Code for Kenmore HE3


The "F" variables (F4-F16) are for electrical problems. You should select Pause/Cancel twice then select Drain/Spin if there is excessive water in the washer. Re-select cycle and press start. According to the manual, if the problem remains, call for service.

Dec 27, 2006 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE3 Front Load Washer Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

fordexpert

Level 3 Expert

5690 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...