Question about Xerox 212 Laser Printer

1 Answer

Xerox 214 copier - U 4 code....what does it mean?

Xerox 214 copier - U 4 code....what does it mean?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 239 Answers

A U-4 code mean the machine did not reach to temperature.
On this machine check to see if the side door is completely closed.
This door also has some to close with a circuit board on the side.

Check to see on the side door if the small flat metal springs are aligned and not bent, with the power cord disconnected. If these metal springs are out of place a short can occur. Be very careful in this area. If you are not sure what you are doing do not try to service this area of the machine.

One other thing, if the machine has been stored in a very cold place, brining the machine to a room temperature will take about 2 hours for the machine's circuit boards just to warm up.

Usually on this problem, it may be a combination of problems. It means a new fuser assembly, or main circuit board. Not easy to get to, it is in the middle of the machine. Everything has to be taken apart without breaking other components.
Be very extra careful if you are doing this work yourself. This is why you should place a service call for a Xerox service rep to do the repair.

Posted on Oct 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shows error 214-315


Are u sure of the error code ?
Fault code 124-315 : ESS PWB Fail

Mar 02, 2016 | Xerox WorkCentre 7232 VSE All-In-One Laser...

1 Answer

Errorcode016-214 at xerox wrkcenter pro128


1. Make sure the optional Hard Disk Drive has been installed
2. Power the machine off and on

May 05, 2011 | Xerox WorkCentre Pro 123 Copier

1 Answer

Have a 214 xerox copier get e5 error and it will not reset


Remove the copy cartridgte and look on the right side of the machine. Clean all the contacts you see with a soft cloth, maybe lightly saturated with alcohol.
Then on the door where the copies exit, open that door, you will see a metal, sawtooth shaped piece of metal, just before the paper exits the machine on that door. Take a brusk and gently clean the black ink off that sawtooth. Normally what happens is that builds up with ink and starts to arch causing the E-5 code.
You may want to check the socket that is one the upper left portion of that door to inspect the contacts for damage.

Mar 02, 2010 | Xerox Office Equipment & Supplies

1 Answer

Copier is a 214 and shows U6 code


A U-6 means the memory on the main board failed.
If the machine is old, the battery on the board is old and not holding the values in the machine.
Replace the main board will correct the problem.
Since it is in the middle deep in the machine you might need to have Xerox repair it for you if they still provide service to this model.
Good luck.

Sep 06, 2009 | Xerox 212 Laser Printer

1 Answer

Missing user's manual.


Google a business called " the parts drop". Call and ask for Britt, he most likely has one.

May 16, 2009 | Xerox 212 Laser Printer

1 Answer

Xerox 214 dc


It means the cartidge alignment is dis-balanced. So you need to fix it and may be re-fill cartidges also.

Dec 11, 2008 | Xerox 1 YEAR ON-SITE SERVICE AVAILABLE ON...

1 Answer

Xerox Copier 214


A U4 is a fuser overtemperature.
You can hold down the "0" while powering the machine on. That will enter the machine into diagnnostics.
Next enter code 401, and press start, See of that clears the problem.
If it does. Remove the fiser and clean the buildup off the thermistor.
If it doesnt you will most likely have to replace the fuser.

Jan 29, 2008 | Xerox WorkCentre 214 Laser Printer

1 Answer

Xerox 214


That is a fuser overheat message.
You can try this. Enter diagnostics. To do that turn the machine off, then press and hold down the ( 0 ) zero button while you turn the power on.
Once the machine comes on in diagnostics. Enter code 40 1and press start to see if it clear the fault.
That is enter 40 press start then 1 press start.
If that does not resolve the code you need to replace the fuser.

Dec 10, 2007 | Xerox 1 YEAR ON-SITE SERVICE AVAILABLE ON...

Not finding what you are looking for?
Xerox 212 Laser Printer Logo

Related Topics:

562 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...