Question about Kenmore Dishwashers

1 Answer

My kenmore dishwasher quit working while washing a load of dishes. all lights are out on the panel. check the reset button, the electrical plug works and it didn't trip the curcuit.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

It is possible that the cord has corroded where it connects to the unit inside.
If you are not familiar with electrical, I would suggest asking a friend or pro to open it up and have a look.
I expect that it will be an easy fix, but pro's generally have a minimum service call charge, so better have a knowledgable amateur look first.

Posted on Sep 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Dishwasher Model 665.16719000 pushpad buttons lights flashing and won't work.


Press "high temp wash, heated dry, High temp wash, heated dry, high temp wash, heated dry, high temp wash, heated dry, high temp wash"

All the lights will go solid at which point you press cancel to reset the board.

**NOTE** if you don't have a "heated dry" button, use the "air dry" or "energy saver dry" button instead.

Apr 03, 2014 | Kenmore Dishwashers

1 Answer

DISH WASHER NOT WORKING, ONLY CLEAN LED FLASHING


Hello & Welcome to FixYa

Flashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin

Mar 15, 2011 | KitchenAid KUDE60FVSS 24 in Builtin...

1 Answer

After washing dishes it will not drain? My garbage disposal was broken, I just replaced it with a new one. We have done two or three loads of dishes since then, but now it's will not draining after the...


Check the air gap on top of the sink(silver dome next to the faucet). Clean out if plugged. I gather you did remove the plug from inside the disposal where the dishwasher drain connects.

Mar 24, 2010 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Kenmore elite dishwasher does not dry


one of the buttons on the door will give u heat, just push that button

Apr 19, 2009 | Kenmore 18 in. 14432 / 14439 Built-in...

4 Answers

Kenmore ultra wash dishwasher control lock light flashing


Just press the 'Air Dry' button for 5-6 seconds....I have an ancient Kenmore Dishwasher (ULTRA)

Oct 02, 2008 | Kenmore 15899 Built-in Dishwasher

2 Answers

Kenmore 16039 - "Clean" light is flashing & dishwasher won't start


Watch the light closely. If it blinks 7 times then pauses, this indicates a heater or door latch issue.
Press the following buttons in sequence: Hi Temp Wash, Heated Dry, Hi Temp Wash, Heated Dry.
If this doesn't work, check the tech sheet. (should be stuck to inside of the bottom toe panel)

All lights should illuminate then a diagnostic sequence will start.
Listen carefully, as soon as you hear the water begin to fill, open the door and feel the heater. if cold, check the heater for continuity (should be around 10ohms)
Also, bend the door catch on the dishwasher tub downward, this will engage the door latch better. Don't bend too far as it will hit the door while closing.

Jun 15, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

2 Answers

Dishwasher electronic panel locked


remove the touch panel and unplug it for couple of minutes. it should reset>

Aug 20, 2007 | Kenmore 15899 Built-in Dishwasher

6 Answers

Kenmore 66516032400 Dishwasher


On another website, we found a reset code that works for our Kenmore, which I think is the same as yours. Hit Heated Dry, Normal Wash, Heated Dry, Normal Wash (one at a time, within six seconds).

Dec 05, 2006 | Kenmore 24 in. 16032 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Adam Dower
Adam Dower

Level 1 Expert

2 Answers

Fred Sops

Level 2 Expert

272 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...