Question about Dryers
I have a Fisher and Paykel Dryer model ED56 that just continually beeps when I turn it on and stops running after a single rotation.
Entering the Diagnostic Mode
(a) Turn the power supply to the dryer on.
(b) Press and hold the Auto Dry down button, then press the Power
The dryer is now in level 0 of the diagnostic mode. After initial entry into the
diagnostic mode, the Start/Pause button operates the dryer as normal. Press
the Auto Dry up or down buttons to scroll through the fault levels.
There are several levels of diagnostics, most of which are used in
development and production. These levels may bring on various LEDs, but
the level of use for the service technician is that of the last fault.
To enter the last fault diagnostics, enter the diagnostic mode as described
above, then press the Auto Dry up button three times. The last fault will be
displayed on the drying progress LEDs.
The manual is here
Posted on Sep 08, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 26, 2017 | Fisher and Paykel DEGX1 Electric Dryer
Jun 12, 2011 | Fisher and Paykel DEGX1 Electric Dryer
May 14, 2010 | Fisher and Paykel Dryers
Mar 06, 2010 | Fisher and Paykel Dryers
Aug 11, 2009 | Fisher and Paykel DEGX1 Electric Dryer
Apr 29, 2009 | Fisher and Paykel Dryers
3,050 people viewed this question
Usually answered in minutes!