Question about Indesit WA 115 Front Load Washer

1 Answer

Indesit 2000 (washer/dryer)

Fills but does not aggitate. Timer appears to work

Posted by on

  • wave1 Dec 12, 2007

    Thank you. Now I know where to start. Most helpful.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Hi there first remove the back panel and check belt has not jumped off failing that remove the motor and check that the carbon brushes have atleast 12mm of carbon left on them any less than that and they will most likley need replaced, if you still have no drum action after this you will need to replace the speed control module located next to the motor.

hope this is of some help murdozzz.

Posted on Dec 09, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wwa7304vkl motor hums but does not start


motor is going out on your machine.

Jan 05, 2013 | Dryers

1 Answer

LSE7806A Top Load


The belt is still attached to the transmission right?? It sounds like the brakes may be stuck. Or are both belts off and the motor still trips out?

Dec 05, 2007 | Maytag LSE7806A Top Load Stacked...

1 Answer

Washer will not aggitate


LOOK AT THE LIDE SWITCH FIRST WILL IT FILL WITH WATER WILL IT DRAIN WILL IT SPIN IF THE ANSER IS NO TO ALL LID SWITCH IF ONLEY TO AGGITATE MAY BE A TIMER OR AGITATOR IT SELF

Apr 03, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

I have a maytag heavy duty stack washer dryer. tonight The washer stopped working. The elctronic panel seems to be working and the water filled but the machine would not aggitate, spin etc.. it did show a...


Possibly the timer needs to be replaced, if a few of the teeth on the disc get broken off, it will not turn, and that causes it to NOT go into the next cycle. Happened to me, thank God for warranties

Jul 31, 2009 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

Will not agitate 110 92587210 Kenmore Washer


I have 2 words for you: "dog ears".

the dog aggitation ears are what cause the aggitator to aggitate. Those things wear down and not grab after time.

Pretty easy to change out. You just need to pull the aggitator out and change the 4 little plastic ears. Good luck :)

Jul 13, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Indesit WDG1095W combined washer/dryer - program wheel stopped


I'm a bit confused you posted under Bosch but you specify Indesit, which is a UK machine. The really bad news is you need to replace the timer. the really really bad news is you can only buy the timers from Indesit, I can't find them anywhere in the US. The really really really bad news is they want 117.99 british pounds for them! plus shipping and handling. Here is a link to the Indesit site where you can purchase one.

http://www.4indesit.co.uk/cgi-bin/product.pl?PID=111846&query=Indesit%20WDG1095WG&model=WDG1095WG&path=52691

May 22, 2009 | Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

GE WJSR1070A top loader wont aggitate.


You either have a bad timer, transmission, or the agitator is stripped on the splined shaft

Mar 05, 2009 | GE WJSR1070A Top Load Washer

1 Answer

Washer won't aggitate or spin.


your water pressure tube is clogged at the tub. Take the back of the control panel off and blow or a small balst of compressed air down this tube and try the washer again. Powder detergent clogs this tube at the bottom of the tub and does not tell your pressure switch to shut the water off at the proper level thus overflowing your tub.

Feb 01, 2009 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

Drum doesn't pin Model LAT8234AAE


It possibly the switch timer is defective.

Feb 24, 2008 | Maytag PAV2300 Top Load Washer

Not finding what you are looking for?
Indesit WA 115 Front Load Washer Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Darren Moxam
Darren Moxam

Level 2 Expert

67 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...