Question about Televison & Video

1 Answer

Samsung tv/video panel lock

Got panel lock on the tv but no remote how to you correct this model number ti 14p1

Posted by on

  • 5 more comments 
  • luminita10 Jul 03, 2008

    samsung tv/video panel lock problem for TI14P1; i have the remote control that doesn't work with the tv at all even if it is for this tv i can't use the tv or video at all.

    please can u help?

  • wendyayres Sep 19, 2008

    lost remote :( cant do anyhting with buttons on front :(

  • Anonymous Oct 27, 2008

    Using a universal remote that doesnt go in to menu. TV uselessnow

  • dazski Dec 29, 2008

    I can't even turn the TV on now I've accidentally locked the panel and have no remote. You can buy a replacement remote online for around £12, which I'll have to do as it seems no one has a solution on any forum I've searched.

  • Jamie Hughes
    Jamie Hughes Apr 12, 2014

    Unfortunately I have not been able to find a way to remove the panel lock without a remote, if you can get a remote all you do is menu, setup, switch panel lock to off

  • Jamie Hughes
    Jamie Hughes Apr 12, 2014

    you say you have the remote, then press menu, not vcr.menu, just the center menu, go to setup by pressing the across butonn, and swith the panel lock off

  • Jamie Hughes
    Jamie Hughes Apr 12, 2014

    but unfortunately I have found no way to do it without the use of a remote

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If you have a universal remote ( i just used the all for one 4 model )
1 ) press the vcr button. 2 ) hold the magic button down wait for 2 red flashes. 3 ) enter code 0240. 4 ) press the power button on the remote tv will turn itself off. this will get the panel lock off the tv.
i have just done this after 30 mins of trying to work out why the panel lock would not come off with trying the tv codes. you have to use the vcr codes. my tv is now working and my grandson can play his playstation again with no problems just had it working.
dated 13:07:2010 1800pm. hope this helps someone

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Goodmans tv panel lock on, unable to unlock same, no remote or user manual


Please refer to the user manual to open the panel lock. If you do not have the user manual, please search on google with the model number .

Sep 11, 2014 | Televison & Video

1 Answer

Avol mod#alt2260m remot code


I have an avol lcd tv. my tv is not operating with remote and have no remote code remote is ARC-U1 tv model is ALT2260M. Please tell me hoow to apply code and which code is ti be applied on the remote.

Dec 09, 2012 | Televison & Video

1 Answer

Samsung DV3 tv only shows static. I'd unplugged it to put in another room. Now back in its original place with correct connections. How can I acquire code for rc unit?


Try searching online for the remote owner's manual using the remote's brand and model number. The owner's manual will have the codes you need to reset your remote. Check out Remote not working for more tips and solutions.

If that's not the cause of the static on your TV, your next step is to troubleshoot TV issues. Check to make sure your TV is set to the correct channel, generally channel 3 but in some areas channel 2 or 4. Also call your service provider to make sure it's not a service outage.

The problem could also be an issue such as disconnected or improperly re-connected cables, as well as problems with the capacitor or backlight. For more causes and solutions, check out this handy troubleshooting checklist in TV black screen or snowy screen. I hope this helps!

Sep 13, 2012 | Samsung Televison & Video

1 Answer

Panel lock samsung tv combi model Ti-14N3


how do i reset the panel lock on samsung ti-14n3

Jun 30, 2012 | Samsung CXJ1352 13 in. TV/VCR Combo

1 Answer

Samsung lcd tv can't find a source, buttons on remote control don't respond, nor buttons on the control panel on the right side of the TV device


consult the owner manual or call Samsung---this set likely has a lockout feature that locks both the remote and the keyboard out.

You might also want to research this by taking the model number and Google key words "remote lockout" etc.

Jun 01, 2012 | Samsung Televison & Video

1 Answer

Lost remote want to use a univerisal remote but tv say front panel lock How do I unlock it? 32 in westinghouse


On the TV itself, MENU, SET-UP, INPUT, VIDEO then go to Channel lock and de-select it.
Hope this helps. If you post a model number, I can probably get you a manual.
Good luck, R.J.

May 13, 2011 | Westinghouse 32" Flat Panel LCD HDTV

1 Answer

I misplaced the remote to the tv, but can power on and off with the satellite remote. I powered off and somehow the tv has switched to AV status and I am unable to change it back to tv status. When I press...


Hi There,

Don't press any more buttons at the moment as you may further complicate the problem. I really need to know which satellite remote you have to give the correct instructions, but the following applies to a large number of TVs.

First, press the TV button on the satellite remote. This simply ensures that any buttons pressed afterwards control the TV and not the satellite box.

Next look for a button on the satellite remote labelled INPUT or SOURCE. If you can find one of these buttons, try pressing it repeatedly until the picture from the satellite channels appears on the TV screen. If there is a TV/AV button on your satellite remote, press this once.

If you cannot find any of these buttons on your satellite remote or they do not switch the TV back to TV mode, please let me know which Satellite remote you are using. If you don't have a model number for the remote, please let me know the brand and model number of the satellite receiver.

Hope this helps. Please reply to me by clicking on "Add a comment" below your question.

Thanks,
BElectric

Feb 27, 2011 | Durabrand Televison & Video

1 Answer

I have samsung combo tv/vhs, lost my remote control, I have bought new one universal remote, nearly everything working except AV option,most important for me, TV modes number is TI-20P1, I need correct...


I have a samsung TI 20P1tv/video. I was told I would play dvd also but every time I load one it says 'bad disc' what does this mean as the discs I load work every time with other tv.s
Am I doing something wrong? I have not got a manual .

I would be grateful for any help

Juliet

Nov 13, 2010 | Samsung VR8559 VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...