Question about Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

It will not finish the wash cycle. isounds like it is trying and it stops and does the same thing again

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 197 Answers

I think it's the solinoid. To replace, remove the tubular solinoid, about 2 1/2" across, and replace. Don't touch the two electrical contacts, they hold risidual curent, and will give you one hell of a shock.

Posted on Sep 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Whirlpool Master
  • 75,797 Answers

Sounds like a timer issue, what is the model number of this machine?

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix my washer machine ,never stops running,after finish washing,starts with the cycles again by it self


The first thing you might try (if not already done) is to unplug the washer and let it sit for a minute or two. Then plug it in and try again. Maybe a good reset of the logic board will do something.
Does this happen regardless of the cycle chosen? What if you choose spin only? Do the cycle status lights work correctly? At the end of the cycle, before it starts again, does the "cycle complete" light come on?
This problem is likely to be a faulty logic board. Sears may be able to supply one. Perhaps your unit is under warranty.

Nov 29, 2014 | Kenmore Washing Machines

1 Answer

Simpson ezi 950 9.5 will not empty, rinse, spin dry.


That sounds like the pump is jammed. Have you checked for hair slides or similar? Once the pump is free to operate, your Simpson should resume normal service.

Feb 20, 2014 | Washing Machines

1 Answer

Whirlpool quiet wash plus dishwasher


Sounds like the timer module is going bad. Might be getting moisture on contacts. That would explain why it works one time and not the next.Just trying to help!

Aug 14, 2013 | Dishwashers

1 Answer

Stops during wash cycle for about 1 min then starts again, stops, then starts, stops then starts. Does this several times before finally finishing the cycle.


Are you getting an error code? If not, Try unplugging it for 20 minutes.
Then plug it back in, The ccu might have to be reset.

Jan 27, 2013 | Washing Machines

1 Answer

My top dishwasher drawer won't finish through the cycle. It runs fine on rinse only but not any of the wash cycles. It stops mid cycles, beeps like it has been paused, then tries to start again


Try to feel the temperature of water inside the dishwasher. If it is normal room temperature for the hot wash cycles then it is likely the heater is faulty.
It is not easy to replace unless you have good experience with repairing dishwashers.

Jan 17, 2013 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Calypso washer stops/runs every 5 - 30 seconds in the middle of any washing cycle. No error codes. It just stops and than runs again all the time and cannot finish any washing cycle. It is 8 years...


I had the same problem. The washer control board has an intermittent failure. If you unplug power for about 30 minutes then plug it back in you will get a PF code (power failure). Ignore this code and push start again. It may run till it finishes the cycle or it may start cycling again right away. A new board costs about $180 at repairclinic.com

Aug 21, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Loud squeling noise during wash cycle


you have a weak or broken spring on the motor or the belt has stretched

Apr 09, 2009 | Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...