Question about GE WJSR2070B Top Load Washer
I assume you are stating that the pump is not working. You will need to confirm that the wires going to the pump are still plugged into the pump. If so, make sure the unit is sending power to the pump in pump out cycle. If I had to guess, myself working on these for a living. I would say the timer is sending power and that you will need to replace the pump due to it being bad. This is a very common problem with GE. The pump sits in the left front corner of the bottom base panel. It has a set of wires plugged into it, 4 screws holding it to the base panel and two hoses going to it. It vary easy to replace.
Please rate solution
Posted on Sep 07, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: