Question about HP PSC 2175 All-In-One InkJet Printer

1 Answer

PRINTER RAN OUT OF PAPER AND HA CODE 20

PRINTER RAN OUT OF PAPER NOW READS ERROR 20

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 93 Answers

Hi !!



Error code 20 Problem: "Not Enough Disk Space" error message


Possible Cause: Your computer needs free disk space to complete a print job. The amount of disk space required depends on the size of the file you're printing.

Solutions:

  • A large print job has exceeded the memory capacity of the printer. Verify that the SIMMS or memory cards are seated. Add more memory or simplify the print job. Remember the original HP Laserjet has only 128K of memory available, the LJ+ has only 512K and neither one is really upgradable.
  • On the 5P turn the image adapt and page protect to ON or AUTO. These can be set within the Remote Control Panel. Press GO to resume printing.
  • On the 5L, set the Enhanced I/O to AUTO (PCL mode) and resend the print job

  • Windows XP, click Start and then click Control Panel. Click Printers And Other Hardware and Printers And Faxes. In the Printers And Faxes window, from the File menu, click Server Properties, then click the Drivers tab. This shows the settings in your printer's driver. Compare the settings in this dialog box with the ideal settings in your printer's manual. If you see a discrepancy in these settings, the printer may simply need a new driver and delete old one. You can download printer drivers from the printer manufacturer's Web site.
  • Get more help. Installing a new driver won't solve every printer woe, of course, so understanding printer's manual and Windows' built-in Help system will give you an even sharper troubleshooting edge.
Hope this would help !

Regard's
Anurag Shukla

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon Pixma MG 3200 is showing error code 02. I have reloaded the paper 20 times - no joy - stilll error code 02 - Any ideas?


remove jammed paper stuck inside the printer slowly, and u should be up to go
N.B do not pull the paper out forcibly from the front tray as this may cause serious damage
if u dont find any paper inside try to clean what ever it stuck inside the printer and be careful

Mar 22, 2017 | Canon Office Equipment & Supplies

1 Answer

Printer ran out of paper. Replaced it but still won't print.


Are there any error messages, or blinking trouble codes? The last piece of paper will sometimes jam or go in skewed, so perhaps it has a small piece of paper in the rollers.
.

Mar 24, 2016 | Epson Workforce 520 Printer

1 Answer

I have sharp ar-287 error ha-04. How to fix?


this sounds like you have a jam in your fuser unit.To remove this jam open the door at the left hand side,you should see a green lever to the back end lift up and take paper out,after doing this you then have to reset this error code.To enter service mode press P interupt C interupt key in 14 press start key then press CA.Photocopier should reboot if this does work then you need to get your service engineer out

Sep 15, 2009 | Sharp AR-507 Copier

1 Answer

What is code 20


Error 20 refers to the paper jam in the input area.Can visit the following link for all Lexmark printer errors :--

http://www.mj-printers.com/repair/lexmarkcodes.html

Hope this helps !

Thanks

Sep 08, 2009 | Lexmark X75 All-In-One InkJet Printer

1 Answer

Error code 30 - printer not activated on Cannon 210


E3-3 = Paper jam

E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD over current error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error


Aug 09, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Error response: out of paper


Did you press "ok" or "start" after you reloaded the paper? If so, turn off the printer, unplug it from the power source for a few minutes and then plug back in and turn it on again. That should help.

Jun 21, 2009 | HP Deskjet 3845 InkJet Printer

1 Answer

Canon MP150


E23 is a paper feed error. Check the rollers and the paper feed mechanism. Following are the various error codes for your printer:
CANNON Printers MP150/MP160 ERROR CODE 
E9 The connected digital camera / video camera does not support Camera Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error 
E42 22 Scanner error


turn the printer off and lift  the front top and move the cartridge carriage manually at the center and then on the printer.

Mar 14, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

MY Canon Pixma MP 500 Printer won't Print.


Hi
Error 6A00
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Dec 15, 2007 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

I cannot see where the paper jam is


i had the same prob pulled it apart and had to get someone to put it back together ....ha...ha...ha so just get a pro to do it worth the $$$$$$$

Sep 06, 2007 | HP Photosmart C6100 All-In-One Printer

Not finding what you are looking for?
HP PSC 2175 All-In-One InkJet Printer Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...