Question about IBM Tripp Lite Internet Office 500 (09N3854) UPS System

1 Answer

I have an INTERNET750U -bottom row plugins no power

I have an INTERNET750U and the bottom row of plugins have not power. The Top row is good. Recommendation?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

Without seeing the back most UPS units have one set of outlets that are surge protection only while the others are from the inverter (battery) . Dead battery or blown fuse !

Posted on Oct 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell 25UXR A12870-408 Socket 370 ATX RDRAM Motherboard front panel diagram


http://www.ebay.com/sch/sis.html?_nkw=Asus+TUV4X+Socket+370+Motherboard+6+PCI+PIII+1GHz+CPU+

I put Dell 25UXR A12870-408 in my browser search bar, in the hopes of seeing the motherboard, and the Front Panel header.

The above was the best search hit I got.

Ebay is a little whacked with their search engine, sometimes; but the above made me wonder.

Why would you list the Asus TUV4X ,along with the Dell motherboard I am looking for?
Probably just their search engine trying to advertise anything close.

Motherboards do not seem to be the same, except they all use a Socket 370 processor socket.

So out of curiosity, I would like you to look at the Front Panel header, on an Asus TUV4X,

http://www.ebay.com/itm/ASUS-TUV4X-Socket-370-Motherboard-W-SL52P-800Mhz-CPU-Heatsink-M425-/251197524658?pt=LH_DefaultDomain_0&hash=item3a7c8a0ab2

Set your mouse cursor in the middle of the photo, to use the
Zoom In feature.
Now move all the way to the right, to the right of the bottom white PCI slot.

Immediately above that bottom PCI slot, is a row of pins.
You can almost make out FRT_PANEL.
(Of course I'm using a 26 inch HDTV for my main monitor, and that helps, lol!)

What my question is, are the pins in a row/s like that on yours?

Oh, photo of the Dell 25UXR?

http://www.ebay.com/itm/Dell-25UXR-A12870-408-Socket-370-ATX-RDRAM-Motherboard-PIII-SL4C8-1-0-GHz-CPU-/190754347389?pt=US_Motherboard_CPU_Combos&hash=item2c69d8597d

Yes, even with this large monitor, THAT photo does me no good.
(RCA L26HD31. I'm using dual monitors. Also using HP 2009M)

If the Front Panel header pins are arranged like that, I believe we can use the old process of elimination.

Looks like an 18 or 20-pin header.
Some of those pins are used for a speaker. (Guessing)
Some of those pins are Not used. (Not guessing)

The procedure is to have the Power Supply plugged in, then use an LED light to test with.

Old Power On LED, or Harddrive activity LED, whatever.
Just needs to be a TWO wire LED.

Let's number the pins.
Let's say they are numbered ODD for the Top row, and EVEN for the Bottom row.
I don't know where Pin 1 is. Should be a 1 silkscreened on the motherboard, next to Pin 1.

For this example let's say it is on the Top row, and all the way to the LEFT.
That would make the Top row pinout, from LEFT to RIGHT;
Pins 1, 3, 5, 7, 9, 11, 13, 15, 17, and 19.

Bottom row, from Left to Right;
Pins 2, 4, 6, 8, 10, 12, 14, 16, 18, and 20.

My thinking is to touch the two wires from the LED, to Pins 1 and 3.
Power Supply doesn't come on?
Go to Pins 5 and 7.

Go along the Top row, then go along the Bottom row; in this fashion.
When you get to the 2 pins for the Power On switch, there will be a tiny spark, and the Power Supply will come on.

Using an LED light you cannot cause any harm to the motherboard.
HOWEVER, the Power On switch is a Momentary Contact Switch.

Do NOT keep the LED wires on the Power On switch pins, more than 2 seconds.

Power Supply on, and running.

Now, touch two pins, and the LED blinks?
HarDDrive activity LED light.

LED stays on?
Power On LED light.

Computer restarts?
Restart switch pins.

Usually it will be the first 8 pins that will be used.
4 on the Top row, 4 on the Bottom row.

Post back in a Comment.

Regards,
joecoolvette

Mar 10, 2013 | Computers & Internet

1 Answer

MSI 760gm-p21(fx) MB, JFP1 AND JFP2 PINOUTS I NEED TO SEE A DIAGRAM SHOWING ME EXACTLY WHERE TO PLUG the cables on the MB


http://www.msi.com/product/mb/760GM-P21--FX-.html

Hover your mouse cursor on the Download tab.
(Overview/ Specification/ Download/ Support/ Where to Buy)

In the drop down list click on - Manual
On this page under the subheading Download, click on the blue -
M7641v3.0.zip
On the next page click on the country name nearest yours.

Motherboard User Manual.

This is a Zip file. If you do not know how to open a Zip file, please state in a Comment, and I will guide you.

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is divided into two headers on the motherboard.
This you have stated, JFP1 and JFP2.
(Junction Front Panel 1, and Junction Front Panel 2)

JFP1 is for the Power On switch, HarDDrive activity LED, Reset Switch, and a two wire Power On LED.

JFP2 is for an internal speaker/buzzer, and a three wire Power On LED. (Dual color)

JFP1:
4 pins across the Top row.
5 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right side, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is reserved for the factory to use.

D) Pins 2 and 4 are for a two wire Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR ON LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.
F) There is NO pin 10.

JFP2:
4 pins across the Top row.
3 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right, Top row;
Pins 2, 4, 6, and 8.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, and 5. There is NO pin 7.

A) Pins 1, 3 and 5 are for a dual color Power On LED.

Pin 1 is for the Negative ( - ) wire.
Pin 2 is for a Yellow, or Orange part of the dual color Power On LED.
Pin 3 is for a Green part of a dual color Power On LED.

B) Pins 2, 4, 6, and 8, are for a speaker/buzzer.

Pin 2 is for the Negative ( - ) wire of a speaker.
Pin 8 is for the Positive ( + ) wire of a speaker.

Pin 4 is for the Positive ( + ) wire of a buzzer.
Pin 6 is for the Negative ( - ) wire of a buzzer.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 28, 2012 | MSI Computers & Internet

1 Answer

Front panel configuration


Motherboard installed in computer case;
Processor to the Top, 3 Ram Memory slots to the Right, 5 white PCI slots to the Bottom;

Down in the Bottom/Right corner, is JFP1, and JFP2.

The Front Panel header is JFP1. (Junction Front Panel 1)
The header with two rows of pins, and is positioned Horizontal. It is parallel to the bottom of the motherboard.

(The other Front Panel header is JFP2. It is positioned Vertical, and is above JFP1. You may be using it also. Read on)

There are two rows of pins for JFP1.
5 across the Top, 4 across the Bottom.

The pins on the Top row are numbered ODD.
The pins on the Bottom row are numbered EVEN.

Top row, starting from the Right side, going towards the Left;
Pins 1, 3, 5, 7, and 9.

Bottom row, starting from the Right side, going towards the Left;
Pins 2, 4, 6, and 8. There is NO pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED light.
Pin 1 is for the Positive ( + ) wire.
If the Harddrive activity LED light is dim, when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for the Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is/was for the factory.

D) Pins 2 and 4 are for the Power On LED light. A Power On LED light that has 2 wires.
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

Looking at JFP2. (Junction Front Panel 2)
Vertical with two columns of pins.
3 on the Right side, 4 on the Left side.

The Right side is numbered EVEN.
The Left side is numbered ODD.

Starting at the Bottom on the Right side, going Up;
Pins 1, 3, and 5.
Starting at the Bottom on the Left side, going Up:
Pins 2, 4, 6, and 8.

A) Pins 1, 3, and 5, are for a Power On LED light, that has 3 wires.
Pin 1 is for the Positive wire. (Dual color LED )

B) Pins 2, 4, 6, and 8 are for a Speaker. The speaker for BIOS Beep Codes.
Pin 2 is for the Positive ( + ) wire.
Pin 8 is for the Negative ( - ) wire.

Regards,
joecoolvette

Jun 24, 2012 | MSI MS-6580 Motherboard

1 Answer

Epox ep-8npa sli user manual barcode label says 5a 000901821. d33221 is also stamped on board


I don't have access to a motherboard manual, (User Manual), for the Epox EP-8NPA SLI motherboard, Wayne. Sorry.
The only info I have is the basic info on the Specifications,

http://www.newegg.com/product/product.aspx?Item=N82E16813123257

If this problem is in direct relation to the Front Panel header on the motherboard, it shouldn't be too hard for you to find the Power On switch connections.

(Plastic front of computer is the Front Panel.
Area of pins on the motherboard, that the wires from the Front Panel connect to, is the Front Panel header. { FP_1 )

Processor to the top, Ram Memory to the right, and the long white PCI slots to the bottom; the Front Panel header is the long black rectangular block of pins, at the very bottom right.

Pins go across the Top row, and across the Bottom row, of this rectangular block of pins.
Connections made will be from a pin on the top row, to a pin on the bottom row.

It only takes two contact pins for the Power On switch.
(The Power On switch is an ATX power on switch. It is located inside the plastic Power On button assembly.
Here is a basic example of an ATX power on switch,

http://www.directron.com/atxswitch.html )

Touch two pins (One top row, one bottom row), with an LED light.
Take the two wires of the LED light, and use them to touch the two contact pins.

Contact made is no longer than 2 seconds.

If you find the right two contact pins, the Power Supply should turn on.
If not, no harm, no foul.

For example, you have touched the two pins for the HarDDrive activity LED light.
Or pins for the Power On LED light.
You won't hurt anything using a small LED light for a jumper.

Once you find which contact pins turn the Power Supply on, therefore turning the computer on, you can experiment, and see what the other pins are for.

A) Power On LED light
B) HarDDrive activity LED light. and so on.

{ IF, the Power Supply does Not turn on, you have a bad Power Supply}

If this is not the problem simply state so in a Comment. We'll go on to see if we can find the solution.

Regards,
joecoolvette

Nov 23, 2011 | Computers & Internet

1 Answer

661m04-mx-6l foxconn motherboard i need a diagram to tell me where the pins go onto the motherboard the ground ones reset power hdd ect ect ect.


All motherboards use the same pin connections for the front panel switches and led's.

There is a nine pin connector. 5 pins on the top row 4 on the bottom.(orient the board to get this view)

Starting with the top row , Pled+, Pled-, PWR SW, Ground. empty pin.

Bottom row. HDLED+, HDLED-, Ground, Reset, dummy pin.

Jan 09, 2011 | Computers & Internet

1 Answer

Just need to know what the torque specs are for 3.0 toyota 1992


This is for the 3VZ-E SOHC 12V engine, 2959cc catalytic. Sure its the same engine as in the pickup.----------
Stage 1 - 34nm--------- stage 2 - tighten by 90 degrees-------- stage 3 - tighten by 90 degrees-------- -------
the sequence is, with flywheel on your right, looking down on the engine...
--top row of bolts on top bank - top Left to top right bolts 1,2,3,4----------------- bottom row of bolts, on top bank - bottom left to bottom right bolts 3,4,5,6.------------ Top row of bolts on Bottom bank bolts 1,2,3,4------------- bottom row of bolts on bottom bank bolts 5,6,7,8------------ sequence is (top bank) 7,2,6,3,5,4,1,8-------- --------(bottom bank) 2,7,3,6,4,5,8--------
Hopefully this comes out tidy on the other end.

Jan 16, 2010 | 1992 Toyota Pickup

1 Answer

Torque setting for 3l hiace


This is for the 3VZ-E SOHC 12V engine, 2959cc catalytic.
Stage 1 - 34nm
stage 2 - tighten by 90 degrees stage 3 - tighten by 90 degrees-------- -------
the sequence is, with flywheel on your right, looking down on the engine...

top row of bolts on top bank - top Left to top right bolts 1,2,3,4 bottom row of bolts, on top bank - bottom left to bottom right bolts 3,4,5,6.
Top row of bolts on Bottom bank bolts 1,2,3,4 bottom row of bolts on bottom bank bolts 5,6,7,8 sequence is (top bank) 7,2,6,3,5,4,1,8 (bottom bank) 2,7,3,6,4,5,8--------
Hopefully this comes out tidy on the other end.

Dec 13, 2009 | 1985 Toyota Passenger

1 Answer

I have an Asus P5VD2-VM SE motherBoard But Cant find The Leds And Switch Connectors


Hello,

The Front Panel connector is in the lower right corner if you view the MB with the CPU at the top. There are 4 pins on top of the connector and 5 on the bottom. It should be labeled F_PANEL. The connections are:

(PWRLED)
Top Row first: Power LED +
Top Row second: Power LED -

(PWRBTN)
Top Row third: Power Button
Top Row fourth: Power Button Gnd.

(HDLED)
Bottom Row first: HD LED +
Bottom Row second: HD LED -

(RESET)
Bottom Row third: Reset Gnd.
Bottom Row fourth: Reset

Bottom Row fifth: No Connection

The pdf manual will not allow me to copy and paste info so I will lead you to the manual so you will have it to help solve this problem and perhaps future ones.

Go to this site:

http://support.asus.com/download/download.aspx?SLanguage=en-us

In the upper left it has a search box that says "Input Model to Search".
Type in your model number. Click on Search Info.

A verification page will come up. Click on the model number link. You will then get a small window to select your operating system. Do so. Click Search.

You will get a list of available downloads with Manual at the bottom. Click the little + next to Manual. Scroll down to the appropriate language manual. (I assume English. It is the next to last one listed.)

Click on Global (DLM) or Global or China. A download window will open. Select SAVE. Choose the folder to save it to. (My Documents will do.)

When the download is complete click OPEN FOLDER on the download window. The file should be highlighted. Double click on the file to extract the pdf file from the zip file. Once opened, SAVE it as the pdf file where you will be able to reference it in the future.

The front panel connector pinout is on page 1-35.

If you have problems, use the Comment button to reply.

Thanks for using Fixya.


Aug 24, 2009 | ASUS P5VD2-MX SE Motherboard

2 Answers

Repair permissions...always reporting error...why?


Same exact errors as the person posting above. The only difference is that I have the 2.4GHz Intel Core Duo Mac Desktop.

Apr 16, 2009 | Apple iMac 17" Desktop

2 Answers

The same like everyone but know answers like everyone pw, hhd, power led


have a look on the techguys tab at pcworld.co.uk, you will be able to download the maual from there

Nov 13, 2008 | E-Machines eMachines T3830 PC Desktop

Not finding what you are looking for?
IBM Tripp Lite Internet Office 500 (09N3854) UPS System Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...