Magellan RoadMate 700 GPS

Sure. Consult page 59 of the user manual for instructions on how to do it. Here is the link for the manual. Magellan RoadMate 700 GPS Manual.

I have a roadmate 700 the connection box on rear is not repairable do anyone know if possible to get a new one

Mine does the same thing. You may need to do the 'reset GPS' trick. (hold down the - key and the repeat command key, then choose reset GPS.
For temporary, you can do the diagnostics>sounds (I think).

I woud do a reset on the gps device....I have attached a link to the manual for the Roadmate 700....http://www.starbatteries.com/maro700vegps.html

You are going to look for this
Magellan RoadMate 700 Vehicle GPS View the product manual [Download- PDF, 1MB]


Good Luck

cbinny1

go to the magellan website and all your answers are there.

All navigation units are GPS Receivers - that is - they receive satellite signals. So, no there is no difference.

this is not exactly what youare looking for but it will worth to know i guess. My 700 has auido problem. when i turn it on, i donto get any sound output. If you do the followign, configuration/diagnostic/audiotest, i recover the sound, till i touch sound volume bottom. It works fine considering nto everyday i need sound. I suggest you to

Jossie, The cable that connects your hard drive to your main board could be loose. If it's not loose, then it's your hard drive. The only thing you can do (if it's not the cable) is send it in for a new hard drive. Unsure what the costs will be but the magellan logo screen is produced from memory on the main board while anything after that is when the hard drive takes over. -Daniel

If everything else is working fine, specifically the touch screen, then it's probably your speaker. open unit and check your speaker for anything stuck to the back of the magnet (on the speaker). make sure the cable going from your speaker to the keypad PCB (board) is pushed in all the way. you may want to even pull it out and re-connect it. make sure the unit is off while you do this and try to ground yourself with something. good luck and let me know how it turns out.

Does the initial Magellan screen appear? If it doesn't display anything and it's just blue... :( Normally means that something on the main board is your problem. Which, means your out of luck. What happened to it? It just suddenly stopped working? Let me know. R/