Question about Office Equipment & Supplies

1 Answer

I loaded a blank CD in my Alesis Masterlink but got an error message that it was a bad CD, or rather it said please load a blank CD, then the CD would not eject. Now when it powers up it reads "CDR Error 201" then when it finishes powering up it reads "CDR Error 242". No matter what I try, it will NOT eject the CD.

Posted by on

  • marvin141 Sep 07, 2009

    Firmware is normally loaded in with a CD right? If I can't get the CD to eject, how can I re install the firmware?

  • marvin141 Sep 07, 2009

    I have an Alesis Masterlink, NOT a printer! I loaded a cd in and got an error message that it was a bad disc. It would not eject. I powered down, and now when I power up, I get the error message "CDR Error 201", then when it finishes cycling, the screen says "CDR Error 242". No matter what I try I cannot get the CD to eject, the CD drawer will not open, so I cannot reinstall the firmware. What can I do?
    Thanks
    Marvin Taylor
    owner Five Feathers Music- Digital Recording and BMI Publishing

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,281 Answers

You have to eject disk manually.
For that take niddle or any pin then just oush the niddle in hole arround disk .
Then it ejects disk.

Let me know if you need more assistanse.
Thanks.

Posted on Sep 08, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not find os


Download the OS from the Alesis website, write it to a CD as an ISO image, put the CD in the Alesis, and follow prompt to load the OS

Aug 22, 2012 | Alesis MasterLink ML-9600

1 Answer

Masterlink says load OS


go ahead and try it. reload the os. it is avail on the alesis site.
the o.s. may be corrupted and a reflash is what it needs. if the issue persist, the HD may need to be replaced.

you will need to burn an image cd for the masterlink. most cd programs can do this. if you cant, send me an email.


bcssr@charter.net

dave

Nov 09, 2009 | Alesis MasterLink ML-9600

1 Answer

Starts up wth this error. the HD/CD doesn't fix it. Please help.


reload the os. it is avail on the alesis site.
the o.s. may be corrupted and a reflash is what it needs. if the issue persist, the HD may need to be replaced.

you will need to burn an image cd for the masterlink. most cd programs can do this. if you cant, send me an email.


bcssr@charter.net

dave

Oct 25, 2009 | Alesis MasterLink ML-9600

1 Answer

Upon turning on our Masterlink, it read "LOAD OS".


if you are computer savy, you can disassemble the masterlink and test the cd drive in another computer. if it works, check the power connector to the cd drive. switch it with the hd connector to see if it fires up.


keep use posted.

bcssr@charter.net


dave

Apr 14, 2009 | Alesis MasterLink ML-9600

2 Answers

No display anymore on front of Masterlink


Gotta be one for Alesis, I'm afraid, or one of their authorised agents. You can buy a CD drive or HDD for a Masterlink off the shelf of any computer store, but they don't carry display units!

www.alesis.com - hope it's still under warranty!

Jan 14, 2009 | Alesis MasterLink ML-9600

1 Answer

Masterlink "Disc Read Error"


try to reinstall the O.S. /firmware.
the firmware is avail on the alesis site


dave

Sep 11, 2008 | Alesis MasterLink ML-9600

2 Answers

CD RESET FAILURE


The CD ERROR 277..can be fixed if u make sure the internal cable connection between the Hard disk and the writer are not mixed up and are well fitted...

Jul 11, 2008 | Alesis MasterLink ML-9600

2 Answers

Masterlink


I tried the "pressing play/pause and record simultaneously" during power
up, and it worked.....dunno for how long. The unit still makes strange
noises occasionally and doesn't seem completely healthy, but it's up
and I'm copying files that I want to save. We'll see.

Jun 12, 2008 | Alesis MasterLink ML-9600

1 Answer

IT READS ERROR 181


Hard drive crapped out. Send it back for repair.

May 05, 2008 | Alesis MasterLink ML-9600

3 Answers

Would pay for an OS Disc, I am unable to get the download to burn properly


Is this what you want.
Masterlink OS v2.21 For Windows & Mac
MasterLink allows new software to be installed via CD-ROM. If you have a PC or a Mac with a CD-burner, you can download the file below and create an updated CD for your MasterLink.

Mar 13, 2008 | Alesis MasterLink ML-9600

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...