Question about Televison & Video

2 Answers

Need to program Nova remotes on a Centurion D5 Motor.

Can you please give me the steps to set up 5 x 2 channel Nova remotes on my Centurion D5 gate motor?

Regards,
Johann

Posted by on

  • 1 more comment 
  • Anonymous Mar 19, 2014

    Centurion D5 Evo stops in on the way and stall

  • Anonymous Mar 24, 2014

    nova

  • Anonymous Mar 25, 2014

    Goodday, we misplaced one of our Nova remote controls and would like to reprogram the remaining as we're wooried that the lost one might end up in the wrong hands, how do we go about it?

    Thanks
    Regards,
    Jackie

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 28 Answers

Hi
Have you managed to program the remotes

Posted on Feb 23, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a receiver to pair a Centurion D5 motor with thE Digidoor motor.How do i install the Receiver on a Digidoor motor?


Hi there Vusi.
You should have a manual open and close switch on the wall for your Digidoor. You need to find the two wires which control the open and close functions on the Digidoor Trace these back to the Digidoor motor connect these to the Comm and NO terminals. You also need to supply 12V power to the receiver This needs to be connected to the Possitive and Negative terminals on the receiver. These connections originate in the Digidoor motor housing and can be connected right there. Some Digidoor motors have connection terminals for additional remote receivers in the housing. Remember that the minimum connections needed are Positive, Common(Sometimes the common is also the negative supply so you can bridge the common and negative terminals on the receiver) and NO. Then pair the remote with the receiver as per the instructions in the receiver box. If you still cannot come right post pics of the PC boards of your receiver and Digidoor motor and I will identify the connections for you

Jan 05, 2015 | Televison & Video

1 Answer

How to program a ET BLU MIX remote on a older type centurion d5 gate motor


Ask the shop what to do when their suggestion does not work.

Oct 02, 2014 | Televison & Video

1 Answer

Need to program Nova remotes on a Centurion D5 Motor


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory systems .
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Oct 09, 2012 | Cars & Trucks

1 Answer

How to programme a nova 4 button remote on a gemini gate motor


It's important to know that the Nova remote controls are not compatible with the Gemini gate motor. In order to get these remote controls to work with your Gemini gate motor, you'll need to install a Centurion receiver first (see http://www.centsys.co.za/upload/product_link_files/CS37_Nova_Receiver_Instructions_1031.D.05.0012_4.pdf). Once the Centurion receiver has been installed on your Gemini gate motor, follow the programming instructions as per the leaflet that accompanied your brand new Nova remote control, or download the instructions from http://www.centsys.co.za/upload/product_link_files/English_Transmitter_InsertCS37_1031.D.02.0027_1_Nova.pdf

Feb 22, 2012 | Televison & Video

1 Answer

I need to know how to programe extra remote for my centurion D5 moto gate


If you Google Centurion D5 moto gate you will find a video listed that shows how to do what you need.

Jul 26, 2011 | Sears Craftsman LiftMaster Chamberlain...

3 Answers

I have bought 2 new remotes for my centurion gate motor and the shop assistant told me how to program them.....except it doesn't work - please can someone give me step by step instructions on how to do...


On a D5 Motor To program the first remote place the jumper on in learn mode over J2 and Central Pin after it has completed flashing remove the jumper. Press the button on the remote you want to program, wait until the gate starts moving. To program addtional remotes use the master remote. First remove the jumper so that the 3 pins are exposed. Press the button on the master remote and hold it in. Notice that the LED next to the pins starts flashing after it has flashed 11 times release the button. Now press the button on the second remote and hold it in it should learn the signal.

Jan 13, 2011 | Televison & Video

1 Answer

I have bought an additional remote which I must programme with my centurion sliding gate motor. I need some assistance, but I don't want the other remotes to go out of sync. Please assist. Thanx Dawie


Steps to Programming Centurion Nova Remotes


1. Unlock the motor cover with your Centurion Key, remove this cover.

2. Inside the perspex enclosure there is a small Receiver Board (approx size of a matchbox), identified by wording CENTURION CP9Z, also has the wording J1-Learn; J2-Erase.

3. There will be a small 'shunt' placed on one of the pins labelled J1, J2 or the centre pin - these are the 'Learn' pins.

4. Remove this shunt and place it over (or bridge) the J1 and centre pin together. The red LED Status light, to the left of the Learn Pins will illuminate.

5. Remove the new Remote/Transmitter from its packaging, hold down the required button once and the red LED Status light on the Receiver Board will flash once indicating that the button has been learned. As soon as the light has flashed, remove your finger from the button.

6. If further Remotes/Transmitters are to be added to the system, repeat step 5.

7. Ensure that you now remove the 'shunt' and place it back onto the blank or J2 pin - do not leave it bridging two pins.

8. Close the enclosure, place the motor cover back onto the motor and lock in place.

Aug 28, 2010 | Televison & Video

3 Answers

I need to program a centurion gate motor receiver


Your gate controller reciever only has one code. You must set all the remotes to that code?

Jul 15, 2009 | Home Security

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

7,366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...