Question about Zanussi FJS1225W Front Load Washer

1 Answer

E 20 ERROR ZANUSSI JET SYSTEM - Zanussi FJS1225W Front Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

Posted on Sep 19, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: I have an E20 error

E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi jet system washer error code 247.whats this mean?


Nothing. It is not error code, maybe is time washing for example: 2 hours and 47 minutes. All errors code starts with letter "E" and two numbers or only with two numbers.

Dado

Dec 12, 2016 | Zanussi Washing Machines

1 Answer

Water is coming through the tray but there is a buzzing sound & there is not much water. Could there be a blockage with the jet stream feed into the drum of our Zanussi Jet stream 1400 ?


more than likely, the buzzing sound is probably the circ pump struggling. this is very common. first check filter is clear. if it is there is a hose from the circ pump to the top of the tub or to the door seal, make sure that isn't blocked. don't worry ab there not being much water in the machine, these machines don't use much.

Sep 01, 2016 | Zanussi Washing Machines

1 Answer

Jet stsem water hase stopd comming in the washer


If you mean there is no water in jet system than I suggest to check circulation hose (dirty) of jet system and circulation pump otherwise problem is in " intake water".

Dado

Jun 14, 2015 | Zanussi Washing Machines

1 Answer

Zanussi jet stream 1600 door locked


SOUNDS LIKE THE LATCH IS NOT WORKING AS IT SHOUD. I WOULD START BY REPLACING IT FIRST.

May 23, 2014 | Zanussi IZ161S Front Load Washer

2 Answers

I have a Zanussi 1600 Jet System Washing Machine, it has started the cycle and 4 mins into it, an E10 error reads on the display, have turned the machine off, and back on, checked pipes, can see you...


Hello,
This error code relates to water pressure check that the pipes are not kinked,check the water valves are fully on also check if the little filters in the end of the hoses are cleaned.Make sure that the mains water pressure has not been reduced.There could still be a fault with one of the inlet valves but it is most probably the little gauze filters

Apr 26, 2010 | Zanussi IZ161S Front Load Washer

4 Answers

E10 code on a zanussi jet system washer


Is it a washer-dryer? E10 relates to a fault with the inlet valve.....usually the valve itself going open circuit.

Feb 26, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Zanussi washer dryer jet system does not work


Hi, this problem is caused by the recirculation pump which has either gone faulty or has been clogged up by to much washing powder/liquid! you will need to strip the machine top off first then the rear and the pump is located at the rear of the machine (depending on model ) it is easy to spot as it is the only one that has the hose attached to the pump which leads to the door seal. take it off check for blockages in the pump and pipe and hose if no blockage then replace pump. It will then work like new.........!
Good luck...................

Nov 20, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

E 20 showing on machine


it means u should trow the **** thing from a clip. e20 goes on my nervs

Oct 14, 2008 | Zanussi FJS1225W Front Load Washer

2 Answers

Just wont work


  1. Turn it off.
  2. Unplug it.
  3. Wait 5 or 10 minutes.
  4. Plug it in.
  5. Turn it on.

Apr 09, 2008 | Washing Machines

1 Answer

Zanussi Jetsystem


scrub above the soap tray to make sure the holes are clear if they are you may have a system where the fab condit water valve is u/s.

May 18, 2007 | Zanussi IZ161S Front Load Washer

Not finding what you are looking for?
Zanussi FJS1225W Front Load Washer Logo

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...