My computer hang after start and beep , without starting the window XP and showing the message as CMOS Checksum error - default loaded , press F1 to continue and DEL to enter set up / Q flash. thereafter the computer hang and not beep again after repeated try. I checked the connection, memory card , both the fan and drive etc. but computer not beep again after the start . What shall I do and what is the problems.
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: Sir, My computer hang after start
Hi, Probably there's a problem with your CMOS battery, try to replace it and update you BIOS.Updating BIOS can be done through the Internet, download the latest firmware to update your BIOS. Save and reboot your computer. Hope this Helped!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi! If its hanging on the welcome screen then its time to reinstall a fresh copy of windows xp. System collapses on any given time and the only cure is a windows reinstallation. Hope this helps and have a good one!
Hi, Yea... problem with your CMOS battery, try to replace it and update you BIOS.Updating BIOS can be done through the Internet, download the latest firmware to update your BIOS. Save and reboot your computer. Hope this Helped!
make sure you have met the minimum hardware requierments when installing your XP...which is
with 300 megahertz or higher processor clock speed recommended; 233 MHz
minimum required (single or dual processor system);* Intel
Pentium/Celeron family, or AMD K6/Athlon/Duron family, or compatible
128 megabytes (MB) of RAM or higher recommended (64 MB minimum supported; may limit performance and some features)
1.5 gigabytes (GB) of available hard disk space*
Super VGA (800 x 600) or higher-resolution video adapter and monitor
CD-ROM or DVD drive
Keyboard and Microsoft Mouse or compatible pointing device
If your system hangs up, instead of re-starting it hit Ctrl-Alt-Delete and then click on End Program. As far as your Desktop Board go to www.microsoft.com and type in Hardware Compatibility List. There will be a listing of the hardware that is compatible with Windows XP. It may not be compatible that is why it is hanging up.
Don't forget to vote on this solution before you log out.
Something has hung up. Try removeing hardware, ie... battery, cd drive, keyboard, etc... until you find the nonessential piece of hardware that is hanging up your boot process. (nonessential to the operating system)
check that the pci slot is nice and clean then make sure the card is inserted fully, and restart your machine, if the problem still persists try and get the most up to date driver for the card from belkin's website copy following link and paste in your address box
http://modem.free-driver-download.com/D-Link/14620/D-link-DFM-562IS-Modem-Driver-Windows-XP.html and install it restart the computer if the problem is still there it's 100% faulty modem card and it needs replacing.
hope this helps.