Question about HP PSC 1350v All-In-One InkJet Printer

1 Answer

PSC 1315v won't print

I tried to print a document to an HP PSC 1315v printer, and the printer status shows "Printing," then "Deleting-Printing-Printed," but nothing prints. When I try to scan a document, the power light flashes, but nothing happens. It copies without a gripe. What gives?

Posted by on

  • gpw Sep 08, 2009

    Thanks, but when I cleared out the printer on another computer, it worked again.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

When you go to scan and the power light flashes, that tells you your computer IS communicating with the printer, however it may not be a good connection. Below i described that more. If the connection is indeed fine, and you tried a second pc or re-installed software completely, then I would have to say the printer is dead to you. (ie. a chip on a logic board has failed). Please continue below.

Software may be at fault. Can you print a demo page on the printer? Generally it can be done without a computer connected even, just hold any large buttons on the front of the printer for a few seconds, lights should start flashing, and a test print should print. I bet it will, because you said it "copies without a gripe."

IF that works, maybe you can completely un-install the printer software from Add/Remove Programs, or you can install it on a second computer?

IF that does not make a difference, try a new USB cable if you can. OR See if the USB port on the back of the printer appears loose. Are you able to hold it upwards or downwards or move it around at an angle? You could print another page, and quickly hold the cable in, and pushed up at an angle, or pushed IN-AND-DOWN at an angle.

IF that can be confirmed, you would need a $1 store soldering iron and would have to take the printer apart, and heat-up the connections between the USB port and the logic board. Possibly need $3 of solder from radio shack or what not. Hope I

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the cartridge of my hp psc 1401, copied the test page that was automatically printed, but now I can't print anything. Copying works OK. I don't get an error message or blinking lights on...


what is the status of print job in the queue? whether it is showing printing or no status in the windows.
if the status is printing you delete all the print jobs and switch off and on .then try print something. if no status is there in the windows then you check whether the printer is off line .try make it online by right click on the printer icon then click on the use printer online.

Aug 10, 2011 | HP PSC 1401 All-In-One Printer

1 Answer

How do i add hp psc 1315v series printer to my macbook for printing


download mac driver from "http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=&cc=us&product=374575&"

Aug 12, 2010 | HP PSC 1315 All-in-One Printer

1 Answer

Black ink printing red


Some printers only use the black ink to provide a darker black. They also use the other colors to print black. That is they use all three to come up with black. If you color cartridge is out of two of the colors, you may be getting just the red. Otherwise you may have a hardware problem.

Jan 29, 2010 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

MY HP PSC 1315V WILL PRINT THE HEADER AND FOOTER OF PAGES I TRY TO PRINT FROM THE INTERNET BUT THE REST OF THE PAGE CONTENT IS ALMOST INVISIBLE


Most web pages are in color. Your web browser adds black headers and footers. I would suggest printing a test page to make sure the unit produces color correctly. If not, you can force the output to be in black and white, which should be legibile.

On Windows, go to Start>Settings>Printers and Faxes, then right-click on your printer and open the Properties page. There should be a "Print Test Page" button at the bottom.

Nov 14, 2009 | HP PSC 1350v All-In-One InkJet Printer

1 Answer

Trying to print, but Status Paused is showing


Hi

Thanks for using FIxYa. Please turn the printer off and then cancel all the print queues pending in the bottom toolbar by double clicking on the printer logo if you want to delete all the pending printing files. Now turn the printer on. If you do not want to cancel all the printing jobs then you can double click on the printer logo showing in the right side of the bottom tool bar and then right click on the printing jobs pending for printings then click on restart printing. Issue will be resolved and it will not show ‘paused status’.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 04, 2009 | HP PSC 1210 All-In-One InkJet Printer

2 Answers

Printer not printing documents in que


my printer hp psc1315xi all in one printer copier, scanner will not print any documents, not even a test print, there is also a doucument in it that am not able to delet from the printer

Jan 22, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

I have an HP psc 1315v and we tried to cancel a print job last night and it still will not cancel


I've seen some HP printers become very testy about deleting print jobs... One thing you can try is using the printer and Windows at the same time.

Power off the printer
On your PC, go to Start => Settings => Control Panel
Then choose the Printers icon (wording may be different depending on your version of Windows)
Double-click the Printers icon
Double-click your Printer
When the dialog box opens, click on Printer (upper left corner)
Click Cancel All Documents
The status should change to Deleting...
Once the print job goes away, turn the printer back on.

If that doesn't work, let me know and we'll try something else. If this solves the problem, please rate the solution.
Regards,
Char1ieJ

Dec 17, 2008 | Office Equipment & Supplies

1 Answer

HP PSC 950 auto switch off


The printer is always on despite of the status of the front panel, to turn it off you have to disconnect the power cord.
In some models of HP printers, the printer will power itself ON from "standby" when the PC sends it a printing job and go back to "Standby" when the job has finished printing.

Apr 24, 2008 | HP PSC 950 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1350v All-In-One InkJet Printer Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...