Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

Open Question

Kodak ESP-9 stopped on Error Code 3802. Will not clear.

Without prior warning, on my Kodak ESP-9 stopped printing and showed an Error Code 3802. I have disconnected power, etc., but the code will not clear.

Sometimes it will show the message "Detected new printhead, put plain paper in tray and press start." It will not continue regardless of what I do.

"Preplexed"

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 68 Answers

SOURCE: My kodak E 9 showed the message

Hi,

through my experience this is a printhead error message. Make sure that the printhead is seated correctly in the printer. If the error persists all you need is a new printhead. Contact Kodak under 1-800-421-6699 or go through the Interactive Step-by-Step Solutions tool under www.kodak.com/go/itg. Choose All-in-one printer - Print quality - Problem is not listed and follow the steps, then you come on a site where you can order a new printhead for free.

Posted on Mar 18, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will my printer not print. shows error 3802. just prints blank page. do have ink.


Error: "Printhead Failure" (105-3802) - Kodak

support.en.kodak.com/.../error%3A-printhead-failure-(105-3802)

KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...If you are not prompted to calibrate the printhead, turn off the printer, wait ...

Error: "Printhead is missing, not installed correctly, or has ...

support.en.kodak.com/.../error%3A-printhead-is-missing,-not-inst...

KodakAug 25, 2010 - How do I resolve the error message "Printhead is missing, not installed correctly, or has come loose" (error code 105-3513) on my ESP or HERO All-in-OnePrinter? ... If the printhead and ink cartridges are not installed in the printer, install them: ... If the error continues, restart the printer and try to print.

Jan 18, 2016 | Kodak ESP5 AllInOne InkJet Printer

1 Answer

Printer error shows error code 3802 and won't print


  1. Upgrade your printer firmware to the latest version
  2. If your printer firmware is already up-to-date:
  3. If the error continues:
  4. If the error continues,
for more help visit https://cbrtechsolutions.net or
CBR Tech Solutions

Feb 16, 2014 | Kodak Esp 5250 All-in-one Inkjet Printer

1 Answer

Error code 3802


  1. Upgrade your printer firmware to the latest version
  2. If your printer firmware is already up-to-date:
  3. If the error continues:
  4. If the error continues,
for more help visit https://cbrtechsolutions.net or
CBR Tech Solutions

Jan 19, 2014 | Kodak Office Equipment & Supplies

2 Answers

Getting problem code 3802


Hello thanks for using Fixya
Error 3802 Mean Print head Failure

Turn the printer Off and On, This problem is solved by this mostly.If the problem still there then remove the ink cartridges and the print head and after few minutes put it back in the printer .If the problem still there then do it again almost five times & if still problem not solver and you get error code 3802
then it is probably that your KODAK Esp 3250 Allinone Multifunction Printer is in need of servicing by a service professional.
So go to the KODAK Service Center


Your problem will be solved.

I hope this solution will helpful 4 u
Please don't forget to click on Four thumbs which are given below & then write testimonial in your words for appreciation "if it is helpful"
THANKS
Keep Using Fixya

Feb 28, 2011 | Kodak Esp 3250 Allinone Multifunction ( ...

1 Answer

What is error code 3802 on an ESP 5 kodak printer?


Hello thanks for using Fixya
Error 3802 Mean Print head Failure
Turn the printer Off and On, This problem is solved by this mostly.If the problem still there then remove the ink cartridges and the printhead .If the problem still there then do it again almost five times & if the problem still there then final option contact to kodak support

Your problem will be solved.
I hope this solution will helpful 4 u
Please don't forget to click on Four thumbs which are given below & then write testimonial in your words for appreciation if it is helpful
THANKS & Keep Using fixya

Jan 26, 2011 | Kodak ESP 5 Printer

1 Answer

Printer shows error code 3802 printer will not print


To resolve this error:
  1. Open the printer access door.
  2. Disconnect the power adapter from the printer.
  3. Wait 30 seconds to allow the printer to reset.
  4. Connect the power adapter to the printer. Turn the printer on if necessary.
    • After the printer completes powering up, the message "Printer access door open" will appear.
  5. Close the printer access door.
If the error continues:
  1. Open the printer access door.
  2. Remove and install the printhead two times.
  3. Close the printer access door.
  4. Wait until the printer is ready to use.
If the error continues, contact Kodak.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

Mar 16, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

What is error code 3802?


"Printhead failure" - #3802 Solution (from Kodak website):
  1. Open the printer access door.
  2. Disconnect the power adapter from the printer.
  3. Wait 30 seconds to allow the printer to reset.
  4. Connect the power adapter to the printer. Turn the printer on if necessary.
    • After the printer completes powering up, the message "Printer access door open" will appear.
  5. Close the printer access door.

Feb 16, 2010 | Kodak ESP 5 Printer

1 Answer

Hi i have a kodak ESP 5 printer and having a problem with it. the printer and computer display printer error 3802 after i print my first picture, could you please help me with this. many thanks keiron


try and reseat the print head twice........to check how to take out and put in print head you may visit www.kodak.com/go/printheadsupport . If you still get that same error then its for print head failure and just need to contact Kodak.........

Jun 29, 2009 | Kodak ESP 5 Printer

3 Answers

Printhead Error 3802 I have the Kodak ESP 5 all in one printer. It started printing blank pages a little while ago. Sometimes if I tried to print a couple of times it would eventually come out, so I knew...


3802 Mean Printhead Failuer

All You need to do is turn the printer Off and On

And if the problem still there

Remove the ink cartridges and the printhead

And if the problem still there
Do it that again for (5x)

And if the problem still there

Tell this to kodak support

And tell the troubleshooting steps you did.

Mar 22, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

1,485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...