Question about Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

1 Answer

Remote Not Working etc.

My Westinghouse LCD 30 inch remote stopped working. Had to turn it on at the TV (reminded me when we had only 3 channels you got up to change). Then eventually the screen went black but had sound. Then no power no nothing.
After reading on here I thought the solder connections had gone bad. So..... I bought a soldering iron. I laid the TV on it's front and took 3 screws out of the back panel. That is as far as I got because I couldn't figure out how to get the cover off. So I plugged iot back in and it worked like a CHAMP. Only thing I can figure at this point it was somehow coming uplugged on the back of the TV.
Regardless, I feard the worst and whate4ver it was is ok now.... been working good for 2 weeks.
I know it sounds crazy but I'll take the results.
Hope this helps someone else......

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

If you have no idea what you're doing, NEVER open up a TV, especially if you're planning on SOLDERING!

Even after it's been unplugged for several hours, if you touch it in the wrong place you will be knocked on your ***!!!

If you know nothing about TV's you wouldn't know even where to start looking once you opened it up.

Most likely what happened is an accumulation of dust in an high voltage area of the TV was shorting something out, and when you moved it around and tipped it up, some of that dust moved. In particular if someone smokes in the room with the TV, the dust tends to cling more and conduct more.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV going through channels continuously


Try a reset. Different models do it different ways - but most require either unplugging for 5 - 10 minutes and plugging back in - OR - press and hold the power button on the TV for 20 - 30 seconds. You may need to access the Set Up Menu and perform the RESET from within one of the menus. Good luck!

Jan 27, 2014 | Westinghouse Televison & Video

1 Answer

Westinghouse - 60" Class / 1080p / 120Hz / LCD


There is a method called a Power Scan this method allows you to search for all possible codes. Try this until you reach a code that carries all of the functions desired. If the TV mode button starts flashing rapidly during this process you have exhausted all possible codes.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Apr 17, 2011 | Westinghouse 16093 Remote Control

1 Answer

I played a dvd and now can't get the tv to come on. How do you switch between dvd and television? This is a Westinghouse DVD LCD combo television.


on the remote there are various button at the top to control the functions. these include tv dvd cable etc.
When the remote is set on tv all the functions on the tv work together with the functions of dvd such as play stop etc.all except power channel up channel down etc.
THE REMOTE MAY JUST BE SET TO DVD JUST PRESS TV AT THE TOP OF THE REMOTE OR YOU MAY NEED TO SET IT BACK AND THE PROBLEM IS FIXED!!! THE USER MANUAL SHOWS YOU HOW TO SET IT.

Feb 27, 2010 | Televison & Video

1 Answer

Remote stopped working!


To turn off the 100 button you need the original remote.

Order a replacement from one of the sellers below:

Used Original Zenith Z20LCD1 Remote Control

Zenith Z20LCD1 Replacement Remote


Regards

Mar 09, 2009 | Zenith Z20LCD1 20 in. EDTV-Ready LCD...

1 Answer

Westinghouse LTV-32w4 HDC - adjustment buttons unresponsive, volume drop, etc.


plug your cable connection to a vcr "in" then run a seperate cable cord from the vcr "out" to your television (which should be on channel 3 or 4) depending on your vcr setting and use the vcr to control the channel so when your westinghouse freezes and becomes unresponsive you could still change the channel and so on through your vcr and tv acts like a monitor works for me. N.B be sure to set the volume and so on before it freezes which could be like a 1min window from turning your tv on
P.S ......................Cardinez

Dec 02, 2007 | Westinghouse LTV-32w4 32.02 in. LCD HDTV

Not finding what you are looking for?
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...