Question about Kenwood KDC-135 CD Player

2 Answers

Kenwood kdc-135 clock issue

How do you set the time on this radio? I am able to get the time to display in standby mode but it doesn't flash so I can adjust it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Kenwood kdc-135 clock issue

Does this car stereo have a hook up for my ipod and how do i get it to work

Posted on Mar 29, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers
Re: Kenwood kdc-135 clock issue

Here is the manual for the KDC-135
others should be similar.
if not check out
Good Luck

Posted on Aug 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How doyou set the clock?

In standby mode
Manual clock adjustment
1 Select clock adjustment mode
Push the Control Knob towards FM or AM
Select the CLK ADJ display
2 Enter clock adjust mode
Press the control knob for at least 1 second
The clock display blinks
3 Adjust the hours
Push the control knob towards FM or AM
Adjust the minutes
Push the control knobs toward [<<] or [>>]
4 To exit clock adjustment mode
Press the menu button.

May 13, 2010 | Kenwood KDC-MP232 CD Player

1 Answer

I have a kenwood kdc-mp205 cd player. how do i change the clock? i do not have a manual.

Here is how to set the clock :
Enter standby Mode:
Press the [SRC] button,Select the "Standby" display.
Select clock Adjustment mode:
Push the control knob towards FM or AM, thenn Select the CLK ADJ display.
Enter Clock Adjust mode:
Press the control knob at least 1 second until the clock display blinks.
Adjust the Hours:
Push the control knob towards AM or FM
Adjust the Minutes:
Push the control knob towards |<< or >>|
Exit Clock adjustment mode:
Press the [Menu] button.
That should do it!

May 06, 2010 | Kenwood KDC-MP205 CD Player

2 Answers

Don't know how to set clock on kenwood kdc-138 without manual

change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute

Mar 14, 2010 | Kenwood KDC-138 FM / AM Receiver

3 Answers

How to set the clock on a kenwood kdc mp228

You have to be in " Standby" mode

  1. Select Clock Adjustment mode: Push the Control knob to [FM] or [AM]. Select the "CLK ADJ" display.
  2. Enter Clock Adjust mode: Press the Control knob for at least 2 seconds. The clock display blinks.
  3. Adjust the hours: Push the Control knob to [FM] or [AM].
  4. Adjust the minutes: Push the Control knob to |<< or >>|.
  5. Exit Clock adjustment mode: Press the Control knob.
If you have any more questions, just come back here and leave a comment - I'm happy to help.

Aug 18, 2009 | Kenwood KDC-MP228 CD Player

2 Answers

I want to change the clock on my Kenwood Excelon KDC-X589.

try in standby mode push the menu button scroll through with track button till you see clock adj if not in standby mode try it in cd mode same steps

Mar 15, 2009 | Kenwood KDC-X589 CD Player

2 Answers

My kenwood stereo kdc-135 cr will not display the clock time.

Hold in the button that you change tracks or change radio station with

Feb 18, 2009 | Kenwood KDC-135 CD Player

2 Answers

Set clock time kenwood car radio

Get into (standby mode) by hitting source (src) button until screen says "Standby".
M.Jog key is to the left of the (src) button. Hold it in for more than 1 sec to get into menu mode.
Move Toggle Control Knob (TCK) up (don't turn) until you see "Clock Adjust" on the screen.
Press Toggle Control Knob (TCK) in for more than one second and the time will appear (flashing).
Move TCK up/down for hours, left/right for minutes (again, don't turn knob).
Press (src) button when the desired time is selected.

Oct 03, 2008 | Kenwood eXcelon KDC-X679 CD Player

1 Answer

My car stereo

In standby hold the menu button down untill menu pops up, the use the up down left right and pushing of the joystick to select clock ans set it :)

Jul 25, 2008 | Kenwood KDC-135 CD Player

2 Answers


To set the clock, you need to be in standby mode. Push and hold the B. Boost/menu button. Menu will show up. Use the RT knob up and down until you find "CLCK". Then push the RT knob down until the clock and ADJU shows up. Use the RT control to adjust the time. In normal mode to show and hide the clock, hold down the RT knob.

Sep 30, 2007 | Kenwood KDC-135 CD Player

Not finding what you are looking for?
Kenwood KDC-135 CD Player Logo

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4681 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides