Question about RCA HD52W59 HDTV Projection Television

1 Answer

How do i fix

My color have become unulined

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers
Re: how do i fix

Can u see red green and blue colors? if u can this is a convergence problem. first try adjusting in cust menu.i cant adust then it might be more of a problem

Posted on Dec 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why is my tv in 3D?

The convergence is regulated by two ICs. When the convergence ICs become faulty you get colors not matching and shapes show kind of colored halos that may resemble a 3d effect.

The problem is fixed replacing the two ICs. The repair requires component testing and precision soldering experience and must be done by a technician.

Jan 10, 2012 | Sony KP-51WS500 51" Rear Projection...

1 Answer

I have what I think is a Hitachi 55 inch ultravision rear projection TV that is 12 years old. I think the model is 55UX58B. The color goes out and it becomes black and white. It comes back after a few...

When the tv is it totally black and white and the tv picture are good and clear wright?when the tv colors are fade in and out are clear up and when the tv picture it is in colors it is look good normal picture wright?Tv have no shadows of any kinds of colors when picture are good in colors wright?Yes,take ur hand make fist or take a wooden hamer bangs all around the tv bazel frame if the tv colors come back or tv stay in colors it is have good picture in colors.Tv it is still good just have components parts are cold soldering or CRT colors guns R,G,B just require resoldering works only.

Aug 22, 2011 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Hello, I have a 2005 Sony KP-51WS520 Rear Projection TV. Recently, the green colors all become a yellowish/orangish color. When you are watching a baseball game the grass is a orangish color. ...

DLP tvs have a design weakness,the problems it is call a convergence problems,it is dead.This convergence problems,will have happen many times through out the tv live.The tv have a colors R,G,B lines misalignments,have colors shadow pictures or 3D pictures look alike?Yes,than the tv board,that call the tv convergence board it is dead.The tv convergence board,must require changes 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv colors picture convergencce problems.The tvs shops will cost u like $300-350 for parts and labors.

May 24, 2011 | Sony KP-51WS520 51" Rear Projection...

1 Answer

After couple hours of use colors become blobish

Sounds like a convergence problem if you would like i can send you out the correct parts to fic this problem let me know and i can build u an invoice

Apr 05, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV

2 Answers

Magnavox PTV910. The picture is good but color is bad

the coolant in the blue and green crts has congealed which is causing the red tube to become dominate. The coolant can be changed at home. You can get the phillips coolant replacement kit at the following link which contains the coolant and the CD with instructions.

Jul 15, 2009 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Locating my color wheel in a sharp xr-30x dlp prokector.

Hope this reaches you in time.

1st: Turn the projector off, but leave it plugged in.
Then do the following......
Hold down simultaniously :
Help/Menu button, Enter button, and down arrow button,

Then while holding down all 3 buttons.
Press the Standby/On button

Once the projector turns on let go of the buttons, the press Enter button again and you should see a message in bottom left corner that says "Lamp has been reset to 000000"


Dec 30, 2008 | Sharp 56DR650 56" Rear Projection HDTV

1 Answer

Green color

Hi...this could be the colorwheel. Very common in this model and an easy fix too.

Mar 20, 2008 | RCA HD50LPW42 50" Rear Projection HDTV

1 Answer

Bad picture

Try to consider the following tips:

Smearing out of one or several colors, best seen in txt-mode, my 27CE4599/30R smeared out in red and green, not in blue, fully exchanging the drivers (input and output complete, otherwise the RGB driver will blank the crt) moved the fault to the other color
Replace the 180K feedback resistors in the amplifiers with normal 1/4W metal film instead of 1/8W, they can become open circuited (in mine both green and red were faulty in this way). Change all 3 and not just the defective ones, replace also all the paralleled 75K resistors per color (fe by 47K+27K) to prevent bright color raster (they can also become open circuit)

Nov 29, 2007 | Toshiba 55H70 55" Rear Projection...

1 Answer

Having problems fixing the color, sharpness, ect....

Have you checked the coolant on each CRT? If it becomes cloudy on one or more of the CRTs you will not be able to get a good color adjustment.

Nov 18, 2007 | Projection Televisions

1 Answer

Yellowish color

turn off the color and see if you have a good grey picture if not your grey scale is off and requires adjustment

Aug 26, 2007 | Hitachi 43F300 43" Rear Projection...

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides