Question about FIC IC-VG61 (dhicecube) Barebone

3 Answers

Need replacement specific case fan for this system.

I am in desperate need of a replacement case fan for an FIC IC-VG61. The one in it burned out. It is made by Chiefly and the model number is CCB13898S12M and it is 12volt sleeve bearing. The size is 138mmX45mmX40mm and has a 3 pin plug. Chiefly is in Tawain and I can find no ordering information for this part, although it does list the part on their website. Anyone know where I could get this or have one from a system they are parting out?

Posted by on

  • koko47 Dec 10, 2007

    one of the first ideas I had, there are no ads for this case at all.

  • Tevacat Jan 12, 2008

    Yes .....

    I've gone through the same steps. The Taiwan site is surely weird...there is is no way to order or even ask questions just get data. Anyway, I have one that is not dead yet but is definately speaking to me of leaving this life shortly. Conseqeuntly I have been on the hunt. Let me know what you find and I'll do the same.



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers sells these cross flow fans.

Posted on Jul 16, 2008


The Fan does not burn out most of the time.

if you remove the rubber on the end you can insert bearing grease and reinstall the rubber. rotate the fan a few time and plug the fan back in and it should work.

Posted on Feb 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

Have you tried e-bay want-ads section?

Posted on Dec 10, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replacing power supply

Good for you. Let us know when it is done. If you want to know how to do it, Just ask.

Nov 22, 2012 | FIC Ice Cube (ic-hu61) Barebone

1 Answer

Need the software installation cd for fic cube can i download it

You should be able to find the drivers here .

Feb 28, 2011 | FIC IC-VG61 (dhicecube) Barebone

2 Answers


I am not certain of the exact model but I know where you can find one. has Micro PS3, Mini ITX and serveral other SFF sizes. I found a replacement PS for my Shuttle and it is about the same size as yours.

If this helps please vote for my solution.

Sep 03, 2010 | FIC IC-VG61 (dhicecube) Barebone

1 Answer

Will the motherboard support both ATA100 and ATA133 IDE hard drives?

depends on the motherboard and power supply but i would say yes because theres very little power requirement difference between them

Nov 20, 2009 | FIC IC-VG61 (IC-VG61 (ICE-CUBE)) PC...

1 Answer

CPU Power, Changing to a lover voltage CPU

Hi there
Firstly update the bios, then install the new CPU, go into the bios settings and set them to default, that will auto adjust the computers settings, then you can have a look in the bios again to make sure the voltage is running as preferred.

Good luck and thanks for using Fixya!!!

Feb 09, 2009 | FIC IC-VG61 (dhicecube) Barebone

1 Answer

Case fan won't come on. pulled it and tested okay.What gives?

Yes ...the case fan will no doubt be thermally controlled if it's connected to the motherboard .... and obviously something has gone wrong with the sensor. Have a look round and see if there are any other 2/3 fan connectors on the motherboard you could use. Most times there's the "cpu fn" (we don't want to disturb that one!), "sys fn" and one or more "case fn" connectors, but being a bespoke motherboard in that SFF case you may be out of luck. You've already hooked it to 12v to get it working so it wouldn't be difficult for you to wire it permanently to a spare power connector (you will probably have to cut the cables and rejoin them). However bear in mind that the fan will then run continuously.

Sep 01, 2008 | FIC IC-VG61 (dhicecube) Barebone

3 Answers

New power supply

Hey, I couldn't track down much info on this one either, . . But i did find these 2 places that are linked to Laconic (Enterprises), one looks lke a 'just starting' website, but nonetheless, it has an email, and contact info, the ebay listing shows a variety of 220W Style PSU's you *might*? be able to check into for a compatible one.


Maybe these will help, if not, feel free to share any more info with me that I can use to help tracking these down for you.


Nov 18, 2007 | FIC IC-VG61 (dhicecube) Barebone

4 Answers

IC-VG61....need drivers!!!

Aug 17, 2007 | FIC IC-VG61 (dhicecube) Barebone

Not finding what you are looking for?
FIC IC-VG61 (dhicecube) Barebone Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top FIC Computers & Internet Experts


Level 3 Expert

781 Answers


Level 3 Expert

82322 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a FIC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides