Question about Washing Machines
Sorry, but the obvious sounds most likely, i.e. the pump is either seized or has failed.
Unless you've worked on washing machines before, and you can get a tech manual, I suggest calling an engineer.
Posted on Sep 06, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 20, 2016 | LG Washing Machines
Feb 22, 2016 | LG Washing Machines
Dec 22, 2014 | LG Washing Machines
Mar 06, 2014 | Washing Machines
It is a common fault that the drain fails to work in most machines in a period of time and is the most problematic fault in a washing machine. In all occasions it is important that your observation is most important and so is vital to the identification /rectification and solution. If you have noticed that water has leaked then as the drain hose pump/valve and fittings are located on the underside of the machine it is important that you look for possible leaks here. In some cases the drain hose would be clogged at the drain end to outlet of the house and so there will be back flushing resulting in overflow to the outside. Also the drain pump/valve can be clogged. Now remove the drain hose clamps and remove the drain pump/valve, clean the drain pump/valve, use back flushing to clear off all dirt. Now test using power to see if this works and can be simulated. When refitting, the hose must be tightened properly. If the pump/valve does not work even with power then it must be replaced. If there is intermittent power to the drain valve/pump then the program controller unit is a suspect.
Cleaning a pump: http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp
Finally the washer must be placed with a tilt- use a spirit level- so that all water will drain to the outlet port and thereby there is no residual water remaining.
Replacing the pump on a Bosch machine, please check this link for tips:
Jun 12, 2012 | LG Washing Machines
Aug 26, 2011 | LG WM2042 Front Load Washer
Jan 23, 2011 | Washing Machines
Jul 27, 2010 | LG WM-2277HW Front Load Washer
Apr 09, 2010 | LG Washing Machines
Jan 11, 2009 | LG WM-1480FHD Front Load Washer
259 people viewed this question
Usually answered in minutes!