Question about Washing Machines

1 Answer

Hotpoint Aquarius WT540 washing machine. will not fill with water

Hotpoint Aquarius WT540 washing machine. Machine starts normally but then cuts off the water supply stopping the drum from filling so the wash does not continue. Water supply and pressure is fine, supply pipe filter is clear, pump filter is clear, detergent tray is clean, have tried different weight of load same problem. have tried turning off and unpluging to reset, still the same problem. Anyone got any ideas?

Posted by on

  • alive1dub Sep 06, 2009

    Not something I can fix myself then?

  • Anonymous Mar 29, 2014

    whirlpool azb7570 tumble dryer showing error code f04 after power cut.clean filter / water container / clean condenser lights all flashing.Have cleaned & emptied all. Have unplugged machine & left for 2 hours before plugging into power supply but still same. Any ideas?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 497 Answers

Sounds like a timer switch malfunction.

Posted on Sep 06, 2009

  • Greg Mills Sep 06, 2009

    its something you need to call a repairmen out to do, its not super expensive but it needs to be done

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine wont spin


check motor brushes or blocked pressure chamber.

Feb 09, 2014 | Hotpoint Aquarius WT540 Front

1 Answer

Hotpoint wt540, reduced creases and extra rinse lights are staying on all the time


1) clean the contacts ribbon with erase pencil and put a little ethylic alcohol.
2) try it 3) if the problem persist the control board is faulty.
God bless you

Oct 11, 2012 | Hotpoint Aquarius WT540 Front

1 Answer

Hotpoint Washing machine keeps flooding kitchen


For the age of it, you can either replace it or get it fixed. I would personally get a quote first for repair.

May 18, 2012 | Hotpoint Aquarius WT540 Front

1 Answer

My hotpoint aquarius TCL770 isn't drying clothes


Good evening
There is most likely something wrong with the electricity in the machine.
Kolbrun

Feb 26, 2012 | Hotpoint Aquarius WT540 Front

1 Answer

Got a hotpoint washing machine aquarius WT540 think catch is broken how can i open the door


If the catch is broken you are going to need to get at it from inside to release it.

This is usually best done by taking the top or back off and reaching in to release the lock.

Make sure you disconnect the electricty and water before trying this.

Jan 25, 2010 | Hotpoint Washing Machines

1 Answer

Hotpoint Aquarius 1100 WM63. fills with water...I dont think it is heating water...rarely rotates and spins (saw it once in early stage of J prog only) seems to fill and empty but no rotate or spin....


if it fill with water then stops it is the ellement the machine first fills turns the drum then heats up the thermostat cuts in and the it emptys rinses and spins so if it does not get to temp it will stop or continue to wash forever

Jun 27, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Hotpoint WT540 1400 spin Washing Machine stuck on cycle


Could be a sticking water level switch, which controls the water level, or a blockage in the hose to the switch, or a trapped or split hose to the switch. the hose in question is about 6mm in diam,and goes from the sump hose to the pressure switch,if u remove the hose from the preesure switch chamber, check for a blockage there, and blow down the hose to see if it is clear, u should hear the switch click if it is clear, if no click and hose is clear, then I wud say the switch is faulty.
Plz rate my comments.
Thanks

Dec 31, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

On/off button and mini load LED's flashing ON Hotpoint WT540


Make sure there is no water left in m/c, lay hose down to draln completely, try spin again, if still no go, remove motor and check brushes.

Dec 15, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint Aquarius WD420 5+5Kg


The water level vacuum switch are not working , check hose might lose.

Dec 31, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...