Eaton viking fridge needs to be colder

There are several options for obtaining a replacement oven bake element for your 11-inch by 16-inch Eaton Viking 305 Wine model with 9-inch contacts. Here are some of the options you can try:

Check if the manufacturer Eaton Viking offers a replacement element compatible with your oven model. You can check their website or contact their customer service for help.

Look online for spare parts stores for appliances. You can search online or local stores that sell oven bakeware for your oven model. Some popular online stores include Amazon, eBay, or appliance parts sites.

Contact an oven technician or servicer for assistance. A qualified technician may be able to help you find the correct replacement oven bake element for your Eaton Viking 305 Wine model.

Look for online forums or groups for appliance owners. There are online groups where homeowners discuss their experiences repairing and maintaining their appliances. You can join these groups and ask questions for help and advice on finding a replacement oven bake element for your Eaton Viking 305 Wine model.

It is important to note that you may need to provide the exact model number of your Eaton Viking oven when searching for a replacement part to ensure you get the correct part for your appliance.

To the owner of the Eaton Viking stove RS3028W-1, yes you CAN get replacement hinges!
I too, have this stove model (circa 1996) with exactly the same problem and I have spent the past 18 months looking for replacement oven hinges. I was very frustrated at the thought of having to throw out a stove that cooks and bakes wonderfully and has not needed any repairs till now and having to buy one of the new subpar ones that constantly need repairs. Plus you can't do canning on the new stoves and the few remaining coil models are extremely poorly made.
I have found 2 places that carry the hinges.
1. Reliable Parts, 1-800-663-6060. This company is located in Montrea (St. Leonard), Quebec.
2. Appliance Shark, 1-800-663-1176. This company is located in Barrie, Ontario.
The part number for the hinge is: 318-024-741

I hope this is helpful, and may you have many more years of happy cooking on this great stove.

in 2020 I had a few repairs on my Eaton/Viking dryer ED314W429 1 - replace heater coil - replaced with GE coil kit P# WE25M27K
2 - replace snapped belt - replaced with part# WG03F00846
It takes a while to figure things out DIY, however it's running again..
This link helped me a lot with repair of the element. When I had to replace the belt it was 10x faster due to experience.
https://dontai.com/wp/2016/10/24/viking-auto-dryer-t-eaton-company-heating-element-replacements/
Let's keep these old simple machine running if we can! Cheers Gerald Calgary AB.

Put both dials on cold and wait 48 hours then adjust from there.

yes. you certainly need to get a technitian out there. it seems that you are having a shortage of gas. if you have a gas shortage, then there must deffinitly be a gas leak somewhere.did you recently try to clean the plate that you mentioned with something shap? if so then you might have punctured it and that is where your gas leak might be. you do get special epoxies that you can do a quick fix, but you will still have to send it to a repair shop to regas and evacuate the unit. good luck

I think you should find that 5 would be the colder setting but this is not the case on some frost free models. But you willbe able to tell straight away if you move the thermostat to number 5 it will run for ages before it switches off but not so on number 1!
good luck.................