Question about JVC PD-42WX84 42 in. HD-Ready Plasma Television

Open Question

JVC HV-53PRO Hi there, I appreciate your help on the following problem with my JVC HV-53PRO. Fault: There is sound but no picture: ALL other functions are working fine. However, none of the 3 tubes (R G B) are working as if no high voltage is supplied. So far I managed to check the followings: 1): The HV feed to the 3 tubes seems to be OK. 2): There are sound & video signals from the rear output, so we assume that signal is generated correctly. Questions: 1): Is there a setting that needs to be checked / adjusted? 2): Is there any fuse that may have been damaged & needs to be replaced? 3): Is there a memory chip which may have been damaged? 4): Is there a way to resolve this problem using the remote control? 5): Is there a service / diagnostic manual which we can get hold of? (there is no reference for this product on JVC website at all.) We appreciate any help you can give me. Thanks, Paul

Posted by on

  • nvyg8tr Jan 28, 2008

    My T.V has the red power light but, it will not turn on. At first it would only turn on with the remote every other time and then only at the control panel and now not at all. I'm going to open it up and look inside to see if anything is loose.

    If anyone has any ideas to what I should look for please let me know. Thanks



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 273 Answers

SOURCE: TV was playing fine (then we had a power surge) and now I do not get the digital cable signal on any input (TV, Video 1, 2, 3 , 4 or 5). The TV plays great when I hook up my DVD player to it.

try for online manuals or

Posted on May 30, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On an AIWA HV-MX100, black and white picture OK but why not color?

If the remote works then it works. You might be missing a few functions but I can't imagine that it's capable of switching to B&W. I might be wrong but I think that the TV needs checking.

May 05, 2015 | Aiwa Televison & Video

2 Answers

JVC Projection Television HD 52G886

its the cause of internal settings that should be made proper. just click the link and download the exact model of your unit and check out for the settings in the trouble shooting and picture adjustment options.

Jan 05, 2009 | JVC AV-56WP30 56" Rear Projection...

2 Answers

JVC LT 42x688 no picture just sound

Sorry, this has no easy fix. The good news is you do not need an LCD Panel. The bad news is the Video Processor has a problem.
This TV has x3 Boards. The one you should replace first is the one in the middle. If this doesn't fix it, try the one on the right. The Part #s are on the Boards if you wanna try ebay.

Dec 22, 2008 | JVC LT-40X776 40 in. LCD HDTV

1 Answer

Lens cap still on

Hi, this sounds like CCD chip fault.

JVC will repair this for free if your camcorder was sold between 2002 - 2004 as the CCD chips were faulty before they were fitted into the cameras.

go to them main JVC site and click "support" for details, offer runs until 31/12/08

Sep 27, 2008 | JVC GR-D20EK Camcorder

1 Answer

Jvc hv-53pro television will not power on. Standby light does stay on, so power is getting to control board.

you would need to trouble shoot it with the service manual. You can get the service manual at the link I am posting they email it after purchase and they provide free tech support with an on line tech to help you out with it.

May 03, 2008 | Televison & Video

1 Answer

Great picture

v1 is your verticl scan has stoped for a reason,akb 1 is the feed back from the crt to the video ic, hv 1 is high voltage stop the set ,clear the error codes and start again record them and conpare the results for the true fault.

Sep 12, 2007 | Sony KP-51HW40 51" Rear Projection...

1 Answer

No picture on tv screen

When you say no picture, is there any sound or noise coming from rear of set when you try to turn on. If so then you have no high voltage and maybe a cap in the HV line that is bad. If no sound at all, then maybe a fuse or open resistor in powersupply.

Jul 21, 2007 | JVC AV-48WP30 48" Rear Projection...

2 Answers

No picture but sound is perfect

Sounds like the video output has a problem. Maybe missing the 200 volts from the High voltage transformer. The vertical circuit may have an issue. Either way it's hard to diagnose without looking at it. If you need a technician contact JVC online at: Good Luck

Apr 29, 2007 | JVC AV-36FA44 36" TV

Not finding what you are looking for?
JVC PD-42WX84 42 in. HD-Ready Plasma Television Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides