Question about Electrolux UltraLux 2000 Bagged Canister Vacuum

2 Answers

Electrolux 2100 Cord replacement

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Electrolux 2100

I take my vacuum cleaner to a electrolux service store for repair It cost me 50$ for repair the electrical switch .

Posted on Dec 30, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 75 Answers
Re: Electrolux 2100

Call your local Aerus Electrolux office. If there is a problem in the electrical system you should get that checked before you continue with the machine. As for the cord replacement- Any Aerus service dept. can do that for you. I say an Aerus office because should you let a non-Electrolux employee work on it you will void your warranty.

Posted on Dec 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to replace el8602a power cord

Electrolux Vacuum Cleaner EL 8602A How to replace the ...
Question About Electrolux Vacuum Cleaner EL 8602A. How to replace the ... How toreplace the power cord on Electrolux EL8602A. Asked by gerry nickel on ...

Rewiring the Power Cord for the Electrolux Model G ...

? 4:27
Jan 30, 2012 - Uploaded by Jayson1940D14
Rewiring the Power Cord for the Electrolux Model G ... How tochange the Electrolux 725 Suspension Plate - And Get Access To The Motor ... Brown Vintage ELectrolux Canister Vacuum Cleaner 1401-b - Duration: 0:17.

Electrolux Nimble Upright Vacuum, EL8602A - YouTube

? 3:49
Nov 11, 2014 - Uploaded by Michael Callender
Electrolux Nimble Upright Vacuum, EL8602A Best Price ... Dirt Devil UD70095 Power Reach Multi Cyclonic Pet Bagless Upright - Duration: ...

Jan 30, 2016 | Vacuums

1 Answer

What does it mean when my electrolux 2100 vacuum's protection light is on and the vacumm won't start"is your electrolux not turning on" [a] bag sensor [b]carbon build up............tkx....g.scott

Sep 25, 2014 | Vacuums

1 Answer

Electrolux canister, maybe fifteen years old, green light indicating cord is plugged in is not lit, nor will the the vacuum turn on. Model 2100 Omni-flow automatic, number on bottom of unit F14970F. Thank...

The light indicates the vacuum is getting power, not only the cord is plugged in. If there's a break in the cord, other wiring, or bad connections, the light will also not light because the vacuum isn't getting power.
Have it checked over at an authorized Aerus Electrolux shop. The service tech can diagnose and tell you the problem, as well as provide an estimate. There should be no charge for this.
Use the below link to find the store nearest you.

Mar 16, 2011 | Vacuums

1 Answer

I need to change the power cord on my electrolux 2100. how do i open the body to get to it?

Due to problems getting it back together, I don't recommend taking it apart. Dismantling and reassembly the cord winder assembly is also complicated and most people have problems doing so correctly. I strongly suggest taking it to an authorized Aerus Electrolux store and spending the money to have an experienced tech do the job. However, if you do decide to try this yourself, there are instructions on the second site below. The first site is for locating the nearest Aerus Electrolux store.

Feb 20, 2011 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

The power chord on the 2100 electrolux will not retract

Try standing the vacuum on end, or at a near vertical position, and gently tugging on the cord a few times. This will usually cause it to retract. The problem is usually caused by pulling the cord out too far. Avoid doing this as it can result in disconnecting or breaking terminals and/or wiring.

Jan 12, 2011 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

I need a new power cord for the power nozzle on my Electrolux 2100 canister vacuum. The power nozzle has part number N115M written on the bottom. I have found the power cord for power nozzles PN6 and PN7...

You can buy the hose at an authorized Aerus Electrolux store. If near enough, they will deliver, if too far, they can ship it. The nearest dealer can be found using the below link. Just follow the instructions.
Just provide the model of the machine. They will know what hose you need.

Dec 12, 2010 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

I have an electrolux 2100 and it won`t shut off when i depress the top button? thank you

You need to replace the switch button:

Take out the bag and keep the door open.
While the bag door is still open, turn the machine upside down so you are looking at the serial number.
Pull the cord out one foot.
Use a puddy knife and put it between the rubber side rails and the **** end of the machine.
Use a hammer or malett to hit the putty knife from the back of the rubber bumber toward the bag door.
Pull the rubber bumber stright out on both sides.
Once both bumpers are out pull the lower body of the canister from the **** end toward the intake of the machine.
Once the bottom is open you can then service the motor, cord winder, switch, and all other components.
For all the parts to fix the machine visit:

Mar 17, 2010 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

How do I disasemble an electrolux le 2100 in order to replace the switch?

how to dissamble electrolux 2000 series
vacuum cleaner

Mar 13, 2010 | Electrolux Vacuums

2 Answers

When running the 2100 Electrolux vacuum, it is stopping and starting when pulling or pushing the floor attachment. Seems like the connection at the top of the handle is a little loose or the electric tabs...

Depending on the age of your 2100, you will need to replace, the wand cord, the handle wiring and perhaps theh upper wand inner tube and handle as well.
If you examine your cord contacts they will be blackened from slippage, so will the female socket they plug into. On and aging 2100 the 1/2 inch groove at the front of the chrome handle tube begins to wear and the metal inner tube clip under the thumb button of the wand develops play back and forth. The wand comes apart into 4 pieces, plastic sheath, upper and lower tubes and cord assy.
If the hose handle groove is worn enough to allow in and out play, you will need to replace the handle, it's wiring, and at least the clip button on the upper wand as well as the wand cord.
You will find these wand parts at a pro vacuum shop but if your hose is original you will need to go to an AERUS Electrolux repair center for parts.
Post back with your results.

Nov 22, 2009 | Electrolux UltraLux 2000 Bagged Canister...

2 Answers

Electrolux canister vaccum 2100

The filter for your Electrolux 2100 is located on the rear top of the machine. It is covered by a plastic grill. You simply place your finger in the rear of the plastic grill, push the tab in slightly and lift the grill up to expose the filter. The filter is approximately 4" by 6". It is NOT washable. Most Vac Shops sell replacement filters in addition to them being available at the local Electrolux distributor.

Jul 06, 2008 | Electrolux UltraLux 2000 Bagged Canister...

Not finding what you are looking for?
Electrolux UltraLux 2000 Bagged Canister Vacuum Logo

Related Topics:

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Roger Potts

Level 3 Expert

694 Answers


Level 3 Expert

18258 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides