Question about Polaroid 1720-7 Remote Control

3 Answers

TV remote codes

I have Dish network and have found the remote code for all but 2 TVs. One is a Magnavox MWC24T5 (TV/VCR/DVD triple combo), and the other is a Polaroid TTM-2004R. I contacted Dish and the manufactures and tried all the suggesting I found on Google, none of which resolved the issue.
Any suggestions?

Posted by on

  • 3 more comments 
  • glasair Mar 15, 2008

    I have Dish Network, and can't get any codes to operate the TV or the TV remote to operate the Dish

  • bigleon53 Jan 22, 2009

    I have a magnavox tv/dvd/vcr combination and I need the 3 digit codes for the silver with blue button dish network remote control.

  • elocotor Jan 28, 2009

    I'm trying to program my One For All remote to a Polaroid DHM 0100 DVD player..a little help with the codes?

  • kowal202 Feb 11, 2009

    Same problem here. Polaroid TTM-2004R just doesn't have a dish code. I did the code scan and no luck. Now what?

  • Anonymous Mar 19, 2014

    remote code for tv

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My TTM-2003 uses 745 with the dish network 5.0 IR remote. it only runs the TV channel and volume, not the DVD. If anyone has the DVD code I would like it. Other codes for polaroid:
TV DVD
671 647
678 677
745 635

Posted on Jan 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Does anyone know a code for sony cd/dvd player dvp-ns57ps progressive scan?

I have a polaroid tv (TTM-2004R), I'm trying to find a code so that my dvd remote control can operate my tv...the tv was gift from a friend who lost the original remote control...
Any suggestions on how should sove this matter would be appreciate it!

Roger

Posted on Sep 09, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

1000,1001,1002,1003,1004
MAGNAVOX and 0000,0001,0002,0003,0004
0057 PHILIPS and 0005,0006,0007,0008,0009

Posted on Dec 08, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

I am trying to program my vcr?dvd player im getting a message that i need the code.i have a magnavox.can you help


Hi, Cheri Torres with DISH Network Customer Service here. Icame across your post and wanted to see if I could help. We do have a fewdifferent codes for each of our different models of remotes. You should be ableto find the model number of your remote on the back of the remote at the top;it is usually a two to three digit number with a decimal point. I will listhere for you the best codes for the Maganvox VCR/DVD combo and also theinstructions for addressing the remote to it. I unfortunately could only find afew codes for some of our remotes not all. For the 3.0, 3.1, and 3.2 IR remotesthe best codes are 658, 333, 001, 661, and 723. For the 4.0, 6.0 and 6.2 IR/UHFremotes the best codes for Magnavox are 500, 566, 661, 333, and 100. I hope youfind these codes and instructions useful and if you have any other questions orconcerns feel free to post back here or email me at Cheri.Torres@Dishnetwork.com.
Instructions for addressing your DVD/VCR to DISH remote.

  1. Press and hold the desired Mode button until all mode button (i.e. SAT,AUX,VCR,TV) back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
    • Press 0 for a TV
    • Press 1 for a VCR/DVD
    • Press 2 for any other device.
  3. Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
  4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Feb 04, 2011 | DISH Network IR Remote Control

1 Answer

I don't have the remote for my tv and need to get into the menu to turn on captions, how can I do that? have a Magnavox 24'' TV/DVD/VCR Combo MWC24T5


On some sets you can push the Up and Down channel buttons at the same time.

You might also buy a new remote:

http://remotes.com/store/magnavox/mwc24t5.html




Jun 29, 2010 | Televison & Video

1 Answer

Cant program dish network remote to my sylvania tv/dvd combo


Not likely will your current remote ever have the capability for your newer model. The code sets are designed into the Dish remote as they were available then and don't 'learn' newer sets.
You might try to find one of the other Funai brand code sets under these names:
Funai, Symphonic, Emerson, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, and Misakai
Even if you do find one that gives you some functions, I doubt you will find one set for both TV and DVD player so you will have to try individual code sets; one for TV, another for DVD.

Jul 12, 2009 | Toshiba MW27F51 27 in. TV/VCR/DVD Combo

4 Answers

Dish Network remote code for RCA 20F510TD TV/DVD


hello and please help.
want to know the codes and way to program this rca dish remote model RCR500SAM1 for my Toshiba tv.
ive done it a few years ago but forgot.
so i need the codes for toshiba tv and way to program this rca dish network remote.
grateful,
kay

Jul 26, 2008 | RCA 20F510TD 20 in. TV/DVD Combo

2 Answers

Code for trutech


dish network remotes dont work with very many tv/vcr or tv/dvd combo units

Jul 11, 2008 | DISH Network IR Remote Control

1 Answer

Finding a code


Look under Funai with dish network.

Nov 19, 2007 | Philips Magnavox MWR20V6 DVD Recorder/VCR

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

3 Answers

Dish network


With the dish remote and do a code search as described in the remote manual and see if you can find it that way. If you go through the entire code search and none of them turn off the VCR/DVD combo, then there is nothing you can do, as those codes in the remote are all stored in the remote and they cannot be programed in. If you do not have a remote manual to set up the remote, to do a code search, simply go to the dishnetwork web site and search for it.

Sep 27, 2006 | Emerson EWD2004

Not finding what you are looking for?
Televison & Video Logo

2,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75283 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...