Question about Hotpoint WMM39 Front Load Washer

1 Answer

Hotpoint wmm39a the door closes but the door lock button keeps flashing so the cycle wont start

Posted by on

  • newlew5 Dec 14, 2007

    thanks for answering but do you know how much the circuit board would be to replace

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 139 Answers

IF you machine is a wma39 not a wmm39a then what has happed is that you control board is blown basically.
TO check this remove the soap draw and you will c three screws remove them... TO make removing the panel easier i would suggest removing the top as well as the front panel is wedged into it.. Then unclip the board from the panel and you will c where the big wiring plug is attached that the tracks on the board are blown.. There is no point replacing the board untill you can work out what has caused it to blow because it will blow again.. Its usually the motor or the doorlock which blows the board.. Trust me i been dealing with this type of machine for years...

Posted on Dec 09, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door sign flashing and keeps clicking - Hotpoint Aquarius WMF720


It seems that the door cannot be locked.
Check that the door closes correctly and you hear the click when it closes. If this is ok and you cannot start any cycle but continue hear clicking, then you have a problem with the door lock latch and needs to be replaced. Here is a video of how you can do it after you buy the spare part, according to the model and serial number of your appliance. The video is for a different brand of washer but don't worry the process is exactly the same!
If you think you can't fix it your own, you should call an engineer.. Washer Door Lock Assembly part 131763202 How To Replace

Feb 28, 2017 | Hotpoint Washing Machines

1 Answer

Hotpoint washing machine door is closing but won't start any cycle. Just flashes 'door'


The main control can't sense your door lock assembly and 'thinks' your door is open... Look up the door lock with your model number

Apr 23, 2016 | Hotpoint Washing Machines

1 Answer

Why is F16 code flashing up on my bosch avantixx washer dryer


The door is not locked properly.
Open and close the door again and press the "start reload" button (play and pause button). If necessary, open the washing machine door, remove some of the cothing items and then push the door closed again. You can also try switching the washing machine off and on again, setting the programme and then starting the programme.


bosch-avantixx-washer-dryer-rpxi2kdaoxqb2kdbm042ffrw-5-0.jpg

Aug 26, 2012 | Bosch Logixx WFT 2806 Front Load...

1 Answer

My washing machine wont start. The door lock


You will have to replace the door lock wax motor.

May 21, 2010 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

Door locked light flashing when door is closed


push on the door where the lock is... it may not be fully locked.

Feb 22, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

3 Answers

Door lock light flashing


Best Solution posted on Dec 09, 2007 3%20stars.png
noavatar_s.gif
WASHDOCTOR
Rank:guru_s.gif Guru
Rating: 87%, 146 votes
IF you machine is a wma39 not a wmm39a then what has happed is that you control board is blown basically.
TO check this remove the soap draw and you will c three screws remove them... TO make removing the panel easier i would suggest removing the top as well as the front panel is wedged into it.. Then unclip the board from the panel and you will c where the big wiring plug is attached that the tracks on the board are blown.. There is no point replacing the board untill you can work out what has caused it to blow because it will blow again.. Its usually the motor or the doorlock which blows the board.. Trust me i been dealing with this type of machine for years...

Apr 29, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

Not finding what you are looking for?
Hotpoint WMM39 Front Load Washer Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

1216 Answers

Eric Taylor

Level 3 Expert

560 Answers

ptpumpman

Level 3 Expert

408 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...