Question about Sanyo CRSR-10 SIRIUS Radio Receiver with Home and Car Kit

1 Answer

Sanyo CRSR-10 will not fully turn on.

I've had this problem for a while too. A friend of mine also had the same problem. The satellite radio receiver tries to turn on after power button is depressed but continually displasys Sanyo and tries to come on again with no luck, this happens over and over again.
PSN is U00951003178
SID is 003821530020
Please advise what to do. I have paid to have this radio for life and really enjoy the programming; missing it!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I just posted about what I think might be a fix in another thread.

Posted on Sep 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drops signal as soon as location changes


You may have a dead zone in lake area !! I experianced alot of signal lose on a lake in oklahoma last year !!! swampratt200 !! AAEEE!!!

Jul 21, 2009 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

3 Answers

Satellite receiver not responding


reset the receiver again and try if its responding again

Feb 06, 2009 | JVC SIRIUS Satellite Radio Interface for...

2 Answers

White screen


I had the same problem with my Pioneer Inno Gex-Inno2BK XM radio receiver. One evening while leaving work, I gently took it out of the cradle & the screen suddenly went completely blank & all white. I could still hear music but there was no screen visible. Solution is this: (1) Gently remove the back cover which covers the battery. (2) Gently remove the dark blue square battery which is only about 1 inch (width) by 3/4 inch (height) by 1/4 of an inch in thickness. I removed mine by holding the receiver upside down & gently shaking it with one hand until the battery came out into my other hand. After about 4 or 5 gentle shakes, it came out. (3) Wait about 10 seconds. (4) Place battery back into XM radio receiver being careful to line the copper power receptable on the battery with a corresponding surface inside the receiver. Each copper area is only about 1/10 of an inch by 1/10 of an inch. Use this as a guide when putting the battery back in to make sure it's lined up properly. (5) Gently slide the cover back in place & let it snap into place. (6) Turn receiver back on by pushing power button like normal. (7) XM receiver should boot up with a full display just like new. All recorded songs are still in place. Nothing has been lost. Problem solved. Root cause of problem is probably some type of boot-up issue with the receiver in which the battery (i.e., the power supply) just happened to be slightly ajar...which also persisted even when placing the receiver back in the cradle until the above steps were taken. The steps above worked beautifully for me...Hope it works for you as well! Have A Great Day...Tom Armstrong

Jan 19, 2009 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

Sirius shots down after a sec...


make sure your device is fully charged, then attempt to turn on again. you may need to use the restore tool available thru the sirius website or mysirius studio.

Mar 22, 2008 | Sirius Satellite Radio S50-TK1 Satellite...

4 Answers

Delphi Roady XT won't turn on


Same here, it's nice to know I'm not the only one with this issue at least; but as to a way of solving this, I've found nothing.

Dec 07, 2007 | Delphi Roady XT XM Radio Receiver

4 Answers

Power up problem


This definitely appears to be a heat issue.

I've spoken with Sanyo Service twice regarding this issue. The first time I was told that the solution was to power the unit off for 1 hour, and that it was something that could be serviced. The second time I called, when I asked what the service procedure was, I was told they don't know what causes the problem. Hmm...

In any case, I managed to get the case open. After removing the faceplate, take out the four screws in the front. Using a small screwdriver / pry tool, pop the case off at the FM out port. BE CAREFUL! The FM transmitter is soldered to the front of the case, so don't move it around too much or you'll lose that nice, strong FM transmitter. Once you locate the connection for the FM transmitter (a small wire), you can open the case such that the two halves lay next to one another.

Once inside, you'll see another metal box that contains what I believe is the main chipset (Agere). More screws here. Once you take the screws out, you can lift off the metal case. Here's where I suspect the problem lies. There is a cheap heatsink pad in here that, I suspect, over the years has degraded to the point where it no longer conducts well. I cleaned the top of the chip with IPA and put some new thermal compound inside. I have not yet removed the pad as I did not have an appropriate thickness piece of something else that I could use to replace it. I then reversed the process to put the case together.

My radio is still funny, but it seems to work better now. Since the weather is now cooler, when I have problems with it, I hold it out the window or in front of the air conditioner and it comes back after a couple of minutes. I also disabled the blue LEDs so that the heating inside the unit is minimized. It conceivable that there's a bad solder somewhere, but I didn't see anything that stood out. If I continue to have issues, I plan to go back in at somepont and remove the pad, replacing it with something else (copper foil? another pad?), but until then, I'm still in business, even if somewhat diminished capability. I've got a lifetime subscription that I'm fighting to avoid a transfer on, at least for a little while...

Oct 10, 2007 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

1 Answer

Display Issues


It sounds like the unit is malfunctioning. I think I had display problems with my first Sanyo CRSR-10 radio. At that time, it was still under warranty, so I contacted Sanyo and had it replaced.

The new radio lasted a few months, but it eventually died with another problem -- it just loops the startup sequence (Sirius logo + beep) and never loads up to the tuner interface. Unfortunately, Sanyo only honors the warranty period of the original radio and since it had been over a year since I purchased the first radio, they would not replace the second malfunctioning radio.

If you explain your situation to Sirius, I'm sure they will transfer your subscription to a new radio -- it's relatively easy for them to do it. I think they just want to discourage frivolous subscription transfers (and hacking) but if you convince them that your old radio is dead, they should be able to do it.

Nov 26, 2006 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

2 Answers

Receiver CRSR-10 not powering fully on


GREGG, HAVE YOU TRIED TOSSING SIRIUS OUT THE DRIVER'S SIDE WINDOW AND TUNING IN A.M.? IT WORKEDS FOR ME GRUMPA

Sep 28, 2006 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

1 Answer

No sound in my car


Try using the audio out jack to see if you are getting any sound (you can use earbuds to check). If you get sound this way, your transmitter is probably shot. Mine went out about 2 years ago on this unit, and I am using a tape deck adapter to get sound. These are easy to find and only run about $10 and work fine.

Sep 25, 2006 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

Not finding what you are looking for?
Sanyo CRSR-10 SIRIUS Radio Receiver with Home and Car Kit Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Are you a Sanyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...