Blank screen when phone flips open

I'd replace the fan motor.

Could it be the screen saver is activating, blanking the screen, so that it reduces battery consumption? Try going into your phone settings and adjust the screen saver.

Three possible causes of sleep mode. first, an extensive screensaver with password lock prevents display. A condition that is observable as a blankscreen also known as sleep mode. Second, a computer power saver settings that shutsdown during idleness. Third, An improper shut down of the computer would have caused a sleep mode to save the system data files.



Restoring the computer to regular functionalioty

First solving predictable sleep mode settings
1. A movement of mouse pointer across the screen should reestablish unprotected password modes
a. password protected sleep mode would display an promp message requiring key code soon after the mouse pointer has changed direction

sloving unpredictable sleep mode settings
1.A computer power saver, screen saver, or splash screen displays prevnting programs acess would require manually powering off the computer system.
a. A manual power back on of the system should restore to program functionality mode

important notes
1. contact expert technical assistance

Hello,

there is nothing wrong with your screen, the problem is from the flex that connects your screen to the phone's main board. This flex must have worn out that's why your screen is not displaying any picture.

The problem is common with flip and slide phones. The flex gets worn out as a result of constant opening and close of the flip or slide phone.

I would urge you to replace the flex and I am assuring you that your screen will display picture again. You might also be lucky to find out that the flex is not well fix, that is, it may have loosed contact.

If you cannot change the flex yourself, maybe you should take the phone to a local repairer within your vicinity, so that the flex can be fixed/replaced.

Take care.

first decide that in your phone activated your screen saver if yes then customize your display setting. if not then active your screen saver which is watch.if you not get any solution then format your phone. these code are under the following.

*#7780# then want security code. please give your security code. then your phone will be restore factory settings.

wire issue

The Flexcable need to be replaced on the phone.

found the solution to the white screen! it's the flip sensor.. what you have to do is open the phone hard and fast... make it so when you flip it open, the sensor knows when to turn the screen on and off.. this may take up to 5 or more times.. jus keep opening it hard and it will eventually work!!!

your phone have display streep problem if ur machanic, change display streep or display or bring it to your nearest repairer

your phone thinks thinks you are dialing someone