Question about HP DesignJet Z2100 InkJet Photo Printer

1 Answer

Error 61:01 wrong file format. The printer cannot process the job.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

Error 999 is a sign that Yahoo's defense is in effect.

"This error appears to be a "catch-all" error code that Yahoo serves up when it doesn't have a more specific error code. It essentially means "Oops! Something went wrong but we don't know what, so we'll just say that Error 999 occurred." The most common reason for receiving Yahoo Error 999 is due to some sort of bandwidth limiting system that Yahoo has put in place on their servers. Once you have exceeded your allotted bandwidth for a specific period of time Yahoo gives you this Error 999 message and doesn't allow you to access the service. People have primarily reported receiving this error when they try to access Yahoo Mail or Yahoo Groups, but other Yahoo services may also be affected.
Why has Yahoo done this? There are two reasons that I can think of:

  1. To prevent DoS (Denial of Service) attacks.
  2. To stop automated tasks from hammering their servers with hundreds of requests a second.
There are many programs around that offer to automate access to various Yahoo services, i.e. check your Yahoo mailbox every 5 minutes, archive Yahoo Groups messages, download files from the Yahoo Groups Photos and Files sections, etc. If you use one of these automated tools then there is a very real possibility that you will run into the Error 999 message. Normal human usage of the Yahoo services shouldn't normally generate enough traffic to trigger the Error 999 message unless you're a very heavy user.
It appears that Yahoo uses your IP address to track the amount of traffic you're generating on Yahoo, and once you reach the limit you get blocked by the Unable to process request at this time -- error 999 message. Once triggered you will find that your IP address has been blocked for a period of time, somewhere between 2 and 24 hours usually
Resolution Steps:Clear your browser's cookies and cache (temporary files).
2.Log into Yahoo through a different country's server. I.e. if you usually log into Yahoo via http://login.yahoo.com/ then try http://login.korea.yahoo.com/ or http://login.europe.yahoo.com/.
If you use a proxy server then try turning it off. Good. Because Yahoo appears to be using your IP address to track your traffic usage, switching off your proxy (or bypassing your ISP's proxy server and accessing the web directly) will result in you accessing Yahoo via a different IP address (i.e. you will be accessing Yahoo via your real IP address and not via the proxy server's IP address). Thus Yahoo will think you're a different person because you're using a different IP address. If you're using a dial-up modem or some other access method that results in you using a dynamic IP address, try disconnecting from the Internet and waiting a few minutes and then reconnecting.

Use a different browser,if you have a web accelerator turn it off
hope this helps

Posted on Sep 06, 2009

  • Starnley Johnwells
    Starnley Johnwells Sep 06, 2009

    sorry this feedback is not intended for this

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing to HP Designjet T1200 from Linux, RHEL 5.3 Server. Error 61:01 wrong file format. The printer cannot process the job, how may I resolve this?


This can happen due to the firmware on the plotter, even if it happens only with some postscript files.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3980523&prodTypeId=18972&objectID=c02189041

Apr 20, 2011 | HP Designjet T1200 Large Format Color...

1 Answer

Error 61:01 - wrong file format


The "file format is incorrect and the printer cannot process the job".
But you already knew that.
Is it ALL jobs that get this error?
If it's just the one, it could be corrupted

Power off from the back of the printer. Disconnect the power cord.
Reconnect the cord and power up.
Check the "graphic language setting"...refer to the user guide.
Resend the job to the printer.
Make sure that the firmware is up to date.
Upgrading the firmware will re-install the PostScript fonts.
The file you are trying to print could be password protected. Resend job without password protection.

Mar 16, 2011 | HP Designjet T1100ps Printer

1 Answer

HP Designjet T770 HDD error 61:01 wrong file format. The printer cannot process the job. There are only 2 types of graphics language setting in printers Menu HP-GL/2 CALS/G4 What do we do, we are...


Did it ever work?

You are using the Post Script drivers, right?
Power down the printer from the back. Disconnect the power cord. Plug it back in and power it up.
Check the graphic language setting of the printer(look at the User Guide)
Resend the file.
Upgrade the firmware to the latest version (www.hp.com/#support)

Feb 09, 2011 | HP DesignJet Z2100 InkJet Photo Printer

1 Answer

Papaer empty


it first detects that no paper in the selected paper supply and it cause an error to your computer memory and printer memory so you must reset the job to clear the error on its memory to the two units.

May 15, 2010 | Xerox Phaser 7760/YDX Laser Printer

1 Answer

Solid orange light and blinking green lights


To check the light Pattern of your printer

Click on Light and Error HP Laser jet 1012 Printer

Check the error details from the above link

Condition of the printer Action/Description Ready

The printer is ready to print. No action is necessary. Processing

The printer is receiving or processing data. Wait for the job to print. Processing...(job name) Ready LED is blinking.

This message is displayed while the printer is processing a current job, but has not begun to pick pages. Processing...(job name) From Tray XX Ready LED is blinking.

This message comes up for any job, once the printer starts to pick paper. Manual Feed or Continuable Error

The printer is attempting to Manual feed, media is not loaded in the paper tray, media loaded is the wrong size or type. Verify that the correct media is loaded.

Press and release the GO button to continue printing. Out of memory

The printer is out of memory. The page you are printing might be too complex for the printers memory capacity. Try lowering the resolution. See Understanding print quality settings for more information. Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:
  • The print cartridge door is completely closed.
  • Media is loaded.
  • The print cartridge is correctly installed in the printer.
  • There is no media jam.
Printer initialization

A printer initialization is taking place. No action is necessary. Fatal error

All lights are on.
  • Unplug the printer for 30 minutes, and then plug it back in.
  • If the printer still has an error, contact HP Support.
All lights are off.
  • Verify that the printer is turned on.
  • Make sure that there is power.
  • Unplug both ends of the power cord, and plug them back in.
Job Cancel

All the LEDs cycle. Canceling...(job name)

The Job Cancel button was pressed and the job is aborted. Power ON

All the LEDs cycle. Checking Paper Path and Checking Printer

This only occurs at power up. Cleaning mode/Engine test

A cleaning page or engine test page is printing.

All the LEDs cycle. Cleaning Page prints

Wait until the cleaning page is finished printing and the printer is in Ready mode. This could take up to two minutes.

Wait until the engine test page is finished printing and the printer is in Ready mode. Clearing Event Log

All the LEDs cycle.

This will happen automatically during an NVRAM Init and a cold reset. No message will be displayed. No Action is Necessary. Power On

Initializing

This occurs when the product is powered on and coming out of EDOS. No Action is Necessary.



Jan 03, 2010 | HP LaserJet 1012 Printer

1 Answer

After a ps print job is sent and printed by the


There is probably nothing wrong with the printer, but it may not be be receiving all the dope it needs. Usually the printer needs a CR/LF signal at the end of the file to print. If it doesn't get that it will assume that it hasn't got all the file and will hang. This may be a setting in the application producing the file, or a setting on the printer itself (i.e needing either a full CR/LF signal or just one of these). Don't like the idea that it doesn't print its own test page though....

Dec 01, 2009 | Ricoh Aficio CL7000 Laser Printer

2 Answers

HP Color laser jet 4700n 49.3048 service error


The problem is usually caused by printing a PDF file with fonts/page size/ page formating errors which will cause the printer to display the 49.3048 error. The only way to use the printer is to POR or recycle the power and delete the print job from the server or spooling device and cancel it on the printer before the offending command is issued to the printer again. You can try updating the firmware to the latest version 46.140.5 from the HP website. MIke L.

Oct 12, 2009 | HP Color LaserJet CP4005dn Network Printer

3 Answers

HP Designjet 500 System Error 71:06


Check the amount of RAM in the Printer using the Front Panel buttons.
install more memory into the Formatter or
try processing the file in the PC instead
of the Printer (select Avoid out of memory in Advanced options in the driver)
good luck.

Aug 03, 2009 | HP DesignJet 500 InkJet Printer

2 Answers

Transfer error with large documents


I'll have to call tech support on this one but I have a feeling that the job is too big for the copier to convert into a pdf file and send it out. It could be cause by lack of printer memory to handle the job. If the copier is hooked up to a fiery controller, then it would work because it has enough hard drive space to process it. You could try changing the format from pdf to another file format and see if that works or break the run up into two jobs.

Jul 02, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
HP DesignJet Z2100 InkJet Photo Printer Logo

3,386 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...